BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
SR-2817Wi
AED0.00
* Pricing Available upon Request *
Product Description
The SR-2817 is a DMX master controller which receives RF or WiFi wireless signal from remote controllers, IOS or Android mobile devices and sends out DMX512 signal to DMX decoders so that the DMX controller can be remote or WiFi controlled. The master converts RF or WiFi signal to DMX signal and enables wireless control. Easier and more convenient control can be achieved via this RF and WiFi to DMX master matching with RF remote or WiFi controller SR-2818, SR-2819 or SR-2819S, IOS and Android. Both AC and DC input version are available.
SR-2701S
AED0.00
* Pricing Available upon Request *
Product Description
The SR-2701S is a DALI relay module which is capable of switching both AC and DC loads. The max. switching voltage for AC loads is 250V, and the max. switching voltage for DC loads is 30V. The DALI RM enables to integrate existing loads which do not have DALI input into DALI circuit and switch on/off the loads.
The max. load capacity for conventional incandescent and halogen light sources is 1000W @ 230V, and max. load capacity for LED light sources is 300W @ 230V. It is easy to be installed into existing standard wall boxes or mounted on 35mm DIN rail with an extra mounting bracket.
Constant Voltage DALI Dimmer SR-2302BEA
AED0.00
* Pricing Available upon Request *
Product Description
The DALI Dimmer SR-2302BEA is a constant voltage dimming controller with 4 channel, 8A per channel output, which complies to standard DALI protocol with 1 DALI address to control 4 channels synchronously. The DALI address can be manually assigned and shown on the numeric digital display or automatically assigned by master controllers. 1 DALI address is available for 4 channels to work synchronously. 0%-100% smooth dimming can be achieved by the DALI dimmer via logarithmic dimming, which is perfect for human's vision.
4.8W/M 3000K LED STRIP LIGHT IP20
AED0.00
Product description
- Wattage: 4.8W/M
- SMD2835
- Lumens: 385lm/m
- Voltage: DC24V
- LED Qty: 60leds/m
- Mains Frequency: 50/60 Hz
- CCT: 3000K
- CRI: >80
- Beam Angle: 120°
- Power Factor: 0.9
- IP Rating: IP20
- Dimension: 5000x8x2mm
- Can be cut by 3LEDs(12V),6 LEDs(24v)
- With 3M adhesive tape back, easy for installation
- Options: ON/OFF, 0-10/DALI Dimmable
- Operating Temperature: -20°C to + 50°C
- Lifetime: 50,000 Hrs.
- Certifications: CE, RoHS
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS
