OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Driver LC 10W 700mA fixC SC SNC2 10W 87500798 TRIDONIC
essence series Product description
- Fixed output LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Independent LED driver with cable clamps
- Constant current LED driver
- For luminaires of protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current 250, 350, 500 or 700 mA
- Max. output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
SR-2422T4-DA2
Product Description
• DALI-2 control device with 4 touch buttons according to IEC62386-101, IEC62386-103, IEC62386-301 and IEC62386-332 • Supports feedback functionality, provides 8 LEDs • Suitable for integration and in combination with DALI-2 compliant central control units • Multimaster capable, multiple modules can be installed on the DALI- line • DALI bus powered, no extra power supply required • Easy configuration via DALI-2 compliant central controller USB interface • Compatible with universal 55mm frames
SR-2102BEA-RJ45
* Pricing Available upon Request *
Product Description
The SR-2102BEA-RJ45 is a WiFi compatible constant voltage DMX512 decoder with 3 channel or 4 channel selectable, 8A per channel output and available in 12VDC, 24VDC and 36VDC output. The DMX512 decoder is designed with DMX512 compliant control interface, which enables users to set DMX address freely and shows the address on digital numeric display. Designed with RJ45 port, the DMX512 decoder could be connected to WIFI & bluetooth signal, could be RF remote controlled or IOS/Android programmed by WiFi. (through a DMX master SR-2817DMX or SR-2816)
SR-2701S
* Pricing Available upon Request *
Product Description
The SR-2701S is a DALI relay module which is capable of switching both AC and DC loads. The max. switching voltage for AC loads is 250V, and the max. switching voltage for DC loads is 30V. The DALI RM enables to integrate existing loads which do not have DALI input into DALI circuit and switch on/off the loads.
The max. load capacity for conventional incandescent and halogen light sources is 1000W @ 230V, and max. load capacity for LED light sources is 300W @ 230V. It is easy to be installed into existing standard wall boxes or mounted on 35mm DIN rail with an extra mounting bracket.
Driver LC 10W 150–400mA bDW SC PRE2 | 28002411
Product description
• NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance) • Dimmable built-in constant current LED driver • Can be either used build-in or independent with clip-on strain-relief (see accessory) • Forms automatically a wireless communication network with up to 250 nodes • Dimming range 1 – 100 % • For luminaires of protection class I and protection class II • Adjustable output current between 150 and 400 mA via ready2mains™ Programmer or I-SELECT 2 plugs • Max. output power 10 W • Up to 82 % efficiency • Power input on stand-by < 0.35 W • Nominal lifetime up to 100,000 h • 5 years guarantee (conditions at www.tridonic.com)Housing properties
• Casing: polycarbonate, white • Type of protection IP20Interfaces
• basicDIM Wireless • ready2mains™ (configuration via mains) • Terminal blocks: 45° push terminalsFunctions
• Adjustable output current in 1-mA-steps (ready2mains™, I-SELECT 2) • Constant light output function (CLO) • Power-up fading at AC • Switch off the Driver with fade2zero • Configurable via ready2mains™ • Service monitor to log certain events • Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) • Suitable for emergency escape lighting systems acc. to EN 50172LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS