BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
SR-2300TS-DIM-EU Black
AED0.00
* Pricing Available upon Request *Â
Product Description
The SR-2300TS-DIM is a touch control dimmer switch with DALI output which complies to standard DALI protocol to dim and switch 4 light zones. Each DALI bus can install multiple dimmer switches. The high strength tempered glass panel offers smooth dimming and switch functions without any flickering. The LED dimmer complies to standard DALI protocol and can be compatible with DALI products from other international corporations. The DALI master can control up to 4 zones with 3 scenes saved for each zone. Available in standard European size and US size as well, the dimmer switch can be installed easily. Compatible with most of our DALI slaves that available in constant voltage and constant current versions, the DALI touch dimmer switch can control different types of LED lighting.
This DALI controller is available with both 100-240VAC input and 12-24VDC input versions. AC input version is designed with built-in 100mA DALI power supply to power up to 50 DALI ECG and it can also be powered by DALI bus while not connected to AC mains. Max. 100 DALI ECG can be controlled by 4 AC input DALI touch panels via broadcast on a control circuit with 2 connected to AC mains and 2 powered by DALI bus.
Tridonic PC 2×28 T5 TEC lp 2x28W 87500216 TRIDONIC
AED0.00
* Pricing Available upon Request *
Temperature protection as per EN 61347-2-3 C5eLarge temperature range (for values see table)Automatic start after replacement of defective lampsSafety shutdown of defective lamps and at end of lamp lifeCELMA Energy Efficiency Index A2Nominal life-time up to 30,000 h (at ta 50 °C with a failure rate.
SR-2812Wi
AED0.00
* Pricing Available upon Request *
Product Description
4 zone wall mounted RGBW DMX512 master SR-2812 is a full touch controller designed in accordance with standard protocol DMX512(1990) and offers fast and accurate color tone adjustment and independent brightness dimming of each RGBW channel with unique design touch color wheel. Designed with touch color wheel, the DMX512 controller can adjust color tone and brightness for RGBW LEDs smoothly and accurately. The DMX512 master can control 4 zones with endless decoders in each zone. Independent smooth dimming of each RGBW channel enables the DMX master to achieve millions of colors. Italian/Australian and American size are optional besides standard 86*86mm size. The Model SR-2812Wi is designed with built-in WiFi, WiFi to DMX function, which enables the DMX master to be controlled by ipad, iphone or android phones.
Module SLA DC G2 50mm SNC | 28001947
AED0.00
Product description
_ Fits in most existing MR16 / GU10 halogen luminaires
_ Replacement of 50 W MR16 halogen lamps or 20 W HID lamp
_ Module with integrated heatsink and optics
_ Free choice of variable dimming and non-dimming LED drivers
_ Pre-wired for quick and easy installation
_ Eye-catching lens optic with mirrors halogen facettes
_ Long lifetime: L70B50 >50,000 h
_ 5 years guarantee
SRP-TRIAC-10CC
AED0.00
* Pricing Available upon Request *
Product Description
SRP-TRIAC-10CC is an ENEC approved 10W triac dimmable LED driver with 1 channel constant current output and adjustable current from 200mA to 350mA by DIP switches, which enables it to be suitable for different LED lights. It is designed with 200-240VAC input. The triac dimming driver is designed with DALI, Push, Triac, 0/1-10V 4 dimming interfaces in 1, which enables it to work with different control systems. The LED driver adopts amplitude dimming output instead of PWM output to ensure real flicker free. Power factor of the driver can be over 0.9 and efficiency is higher than 83%. It enables smooth and deep dimming to 1% without flickering and buzzing noise. 1 DALI address can be automatically assigned by DALI masters. Complying with IEC 62386-101, IEC 62386-102, IEC 62386-207, this DALI driver is compatible with most DALI systems in the market. The Triac dimming driver can be compatible with universal Triac dimmers. While selecting 0/1-10V interface, it is compatible with universal 0/1-10V dimmers.
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS