BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Driver LC 45W 1050mA fixC SR SNC2 45W 87500771 TRIDONIC
AED0.00
essence series
Product description
- Independent driver with strain-relief housing
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Temperature protection as per EN 61347-2-13 C5e
- Output current 1,050 mA
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LC 75W 900–1800mA flexC lp EXC 75W 28000684 TRIDONIC
AED0.00
excite series SELV Product description
- Constant current LED driver for luminaire installation
- For luminaires of protection class I and protection class II
- Adjustable output current between 900 and 1,800 mA via ready2mains Programmer or I-SELECT 2 plugs
- Max. output power 75 W
- Up to 91 % efficiency
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LCA 45W 500–1400mA one4all SC PRE 45W 28000676 TRIDONIC
AED0.00
premium series
Product description
- NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
- Dimmable built-in constant current LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Dimming range 1 to 100 %
- For luminaires of protection class I and protection class II
- Output current adjustable between 500 â 1,400 mA
- Max. output power 45 W
- Up to 91 % efficiency
- Power input on stand-by < 0.15 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LCI 35 W 350/500/700/1050 mA TEC C | 87500192
AED0.00
Product description
⢠Fixed output built-in LED Driver ⢠Constant current LED Driver ⢠Output current 350, 500, 700 or 1,050 mA ⢠Max. output power 35 W ⢠Nominal life-time up to 50,000 h ⢠For luminaires of protection class I and protection class II ⢠Temperature protection as per EN 61347-2-13 C5e ⢠5-year guarantee (conditions at www.tridonic.com)Properties
⢠Casing: polycarbonat, white ⢠Type of protection IP20Functions
⢠Overtemperature protection ⢠Overload protection ⢠Short-circuit protection ⢠No-load protectionDOW-SKD-LD-2414T BK
AED0.00
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS