OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
10W DALI DT6 LED Driver Constant current SRP-2305-10CC350-700
* Pricing Available upon Request *
Product Description
This 10W DALI DT6 LED Driver is in compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, and compatible with universal DALI masters that support DT6 commands. With built-in DALI-2/Push interface, this DALI DT6 device is endowed with high power factor and efficiency. This dimmable driver has maximum output power of 10W. With 1 channel 350~700mA constant current output, it is selected by DIP switch. With class â…¡ power supply and full isolated plastic case, this driver can switch and dim LED lighting fixtures. It features hybrid (PWM+CCR) dimming, in tandem with smooth and deep dimming to 0.1%. Besides, it has error report function. Its protection grade is IP20, which is suitable for indoor LED lighting applications, with 5-year warranty.
Driver LCBI 10W 180mA PHASE-CUT/1–10V lp 10W 87500282 TRIDONIC
advanced series
Product description
- Dimmable built-in constant current LED driver
- Constant current LED driver
- Dimmable via leading edge and trailing edge phase dimmers
- Dimmable via 1 ... 10 V
- Output dimmed analogue (current amplitude)
- Dimming range typ. 10 to 100 % (depending on dimmer)
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- SELV
- Output current 180, 350 or 500 mA
- Output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
DMX-50-500-1750-F1P1
Product keywords
- PWM Frequency: 0~100%, LED start at 0.1% possible.
- Power Factor: PF>0.99/115Vac, PF>0.95/230Vac, at full load ≤4KHz
- Input Current: 115Vac≤0.6A, 230Vac≤0.3A
- Current Accuracy: Output Power Range: ±3%
- Working Temperature: ta: -20°C ~ 55°C tc: 80°C 20 ~ 95%RH, non-condensing-40 ~ 80°C, 10~95%RH ±0.03%/°C(0-50°C)
- Working Humidity: Storage Temp., Humidity: Temp.
- Â Coefficient: Vibration: 10~500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes 5W~50W
- Operating Voltage: 10-54Vdc Non-load Output Voltage:
- Max. Output Voltage: 0Vdc 58Vdc THD: ≤10% at 115Vac, ≤20% at 230Vac, at full load
- Control Surge Capability: L-N: 1kV DMX512/RDM, Push DIM
Driver LC 75W 250–550mA flexC lp EXC 75W 28001808 TRIDONIC
excite series non-SELV
Product description
- Constant current LED driver for luminaire installation
- For luminaires of protection class I and protection class II
- Adjustable output current between 250 and 550 mA via ready2mains Programmer or I-SELECT 2 plugs
- Max. output power 75 W
- Up to 94 % efficiency
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LC 25W 350-600mA flexC SC ADV 25W 28002476 TRIDONIC
advanced series
Product description
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Small design (97 x 43 x 30 mm)
- Constant current LED driver
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Adjustable output current between 350 and 600 mA, in 5 steps with ADV plug technology (pre-selected current 350 mA)
- Max. output power 26.4 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS