OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Driver LC 30W 700mA fixC SR ADV2 30W 87500865 TRIDONIC
advanced series
Product description
- Independent driver with strain-relief housing
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- For luminaires of protection class II
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Output current 700 mA
- Temperature protection as per EN 61347-2-13 C5e
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LC 40W 900mA fixC SC SNC2 40W 87500744 TRIDONIC
essence series Product description
- Fixed output LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Independent LED driver with cable clamps
- Constant current LED driver
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current 900 or 1,050 mA
- Max. output power 40 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
60X60-TR-28002343
key Features
Color temperatures 3,000, 4,000 and 6,500 K • Two luminous flux range variants 2,800 or 3,800 lm • Efficacy of the module up to 120 lm/W • High colour rendering index CRI > 80 • Small colour tolerance MacAdam 41 • Small luminous flux tolerances • UGR < 19 Mechanical properties • Module dimension 595 x 595 mm and 620 x 620 mm
Driver LC 17W 250–700mA bDW SC PRE2
key Features
- Adjustable output current in 1-mA-steps (ready2mains, I-SELECT 2)
- Constant light output function (CLO)
- Power-up fading at AC
- Switch off the driver with fade2zero
- Configurable via ready2mains
- Service monitor to log certain events
- Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification)
- Intelligent Voltage Guard (overvoltage and under voltage monitoring)
- Suitable for emergency escape lighting systems acc. to EN 50172
Housing properties
- Casing: polycarbonate, white
- Type of protection IP20
Driver LC 75W 250-400mA 220V o4a lp ADV 75W 87500728 TRIDONIC
advanced DALI non-SELV series
Product description- Dimmable built-in constant current LED driver
- Dimming range 10 – 100 % (min. 25 mA)
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Adjustable output current between 250 and 400 mA via I-SELECT 2 plugs
- Max. output power 75 W
- Up to 93 % efficiency
- Power input on stand-by < 0.4 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS