BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Driver LCA 50W 350–1050mA one4all lp PRE 50W 28000656 TRIDONIC
AED0.00
premium series SELV
Product description
- NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
- Dimmable built-in constant current LED driver
- Dimming range 1 to 100 %
- For luminaires of protection class I and protection class II
- Output current adjustable between 350 â 1,050 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI
- Max. output power 50 W
- Up to 91 % efficiency
- Power input on stand-by < 0.15 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Constant Current 350mA Dual Color DT8 DALI Dimmer SR-2309FA3-CCT
AED0.00
* Pricing Available upon Request *
Product Description
SR-2309FA3-CCT is a 4 channel constant current 350mA output dual color DT8 DALI dimmer that complies to the latest IEC 62386-209:2011 standard and supports DT8 device commands. This device is controlled via a single DALI address and compatible with universal DALI master controllers that supports DT8 commands. DT8 commands enable easy color temperature adjusting between warm white and cool white. DALI address can be manually assigned and displayed via digital display. It is configurable via DALI software tool and DALI USB interface.
Driver LC 10W 150–400mA bDW SC PRE2 | 28002411
AED0.00
Product description
⢠NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance) ⢠Dimmable built-in constant current LED driver ⢠Can be either used build-in or independent with clip-on strain-relief (see accessory) ⢠Forms automatically a wireless communication network with up to 250 nodes ⢠Dimming range 1 â 100 % ⢠For luminaires of protection class I and protection class II ⢠Adjustable output current between 150 and 400 mA via ready2mains⢠Programmer or I-SELECT 2 plugs ⢠Max. output power 10 W ⢠Up to 82 % efficiency ⢠Power input on stand-by < 0.35 W ⢠Nominal lifetime up to 100,000 h ⢠5 years guarantee (conditions at www.tridonic.com)Housing properties
⢠Casing: polycarbonate, white ⢠Type of protection IP20Interfaces
⢠basicDIM Wireless ⢠ready2mains⢠(configuration via mains) ⢠Terminal blocks: 45° push terminalsFunctions
⢠Adjustable output current in 1-mA-steps (ready2mainsâ¢, I-SELECT 2) ⢠Constant light output function (CLO) ⢠Power-up fading at AC ⢠Switch off the Driver with fade2zero ⢠Configurable via ready2mains⢠⢠Service monitor to log certain events ⢠Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) ⢠Suitable for emergency escape lighting systems acc. to EN 50172DMX-50-500-1750-F1P1
AED0.00
Product keywords
- PWM Frequency: 0~100%, LED start at 0.1% possible.
- Power Factor: PF>0.99/115Vac, PF>0.95/230Vac, at full load â¤4KHz
- Input Current: 115Vacâ¤0.6A, 230Vacâ¤0.3A
- Current Accuracy: Output Power Range: ±3%
- Working Temperature: ta: -20°C ~ 55°C tc: 80°C 20 ~ 95%RH, non-condensing-40 ~ 80°C, 10~95%RH ±0.03%/°C(0-50°C)
- Working Humidity: Storage Temp., Humidity: Temp.
- Â Coefficient: Vibration: 10~500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes 5W~50W
- Operating Voltage: 10-54Vdc Non-load Output Voltage:
- Max. Output Voltage: 0Vdc 58Vdc THD: â¤10% at 115Vac, â¤20% at 230Vac, at full load
- Control Surge Capability: L-N: 1kV DMX512/RDM, Push DIM
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS