BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Driver LC 15W 350mA fixC pc SR SNC2 15W 28003345 TRIDONIC
AED0.00
essence series
Product description
- Dimmable constant current LED driver (SELV)
- Independent driver with strain-relief housing
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- Dimmable via leading edge and trailing edge phase dimmers
- Dimming range 5 to 100 % (depending on dimmer)
- For luminaires with F or M and MM as per EN 60598, VDE 0710 and VDE 0711
- Max. output power 14.7 W
- Output current 350 mA
- Nominal lifetime up to 50,000 h
- 5 years guarantee
COB-Cree 1507
AED0.00
* Pricing Available upon Request *
PRODUCT DESCRIPTION
The XLamp® CXA1507 LED array expands
Cree LEDâs family of highâflux, multiâdie
arrays in a smaller, easyâtoâuse platform.
With XLamp LED lightingâclass reliability,
the CXA1507âs small, uniform emitting
surface enables both directional and
nonâdirectional lighting applications
including lamp retrofit and luminaire
designs. Available in 2âstep, 3âstep and
4âstep color consistency, and featuring
a 9âmm optical source, the CXA1507
brings new levels of flux and efficacy to
this form factor.
SR-2701S-N
AED0.00
* Pricing Available upon Request *Â
Product Description
The SR-2701S-N is a DALI relay module plus DALI to 0/1-10V converter which is capable of switching both AC and DC Loads and controlling 0/1-10y climbable Loads_ The max_ switching voltage for AC loads is 250V, and the max. switching voltage for DC Loads is 30V The DALL RM enables to integrate existing loads which do not have DALJ input into DALI circuit and switch on/off the Loads The DALI to 13/1-10y converter enables to integrate Q/1-10VdimmabLe Loads into DALI circuit and control the loads via DAL'. The max Load capacity for convent on2L incandescent and halogen Light sources is 10.0°W @ 2301, and max. Load capacity for LED Light sources is 300W @ 2301_ It is easy to be installed into existing standard wall boxes or mounted on 35rnm DIN rail with an extra mounting bracket.SR-1009FA
AED0.00
Product Description
The LED controller 5R-1009FA is a universal constant voltage LED strip dimmer controller with 12-36VDC input and output for mono chrome, dual color and RGB/RGBW lights. It is designed with4 channels and maximum SA/channel output. Bui t-in RF receiver enables the LED light controller to be wireless controlled by remote and wall mounted controllers and be compatible with a variety of remotes to control single color, dual color and RGB/RGB+W LED lights especial y LED strip lights. For single co or LED strip, the 5R-1009FA works as LED dimmer to adjust brightness and switch on/off. For CW+WW dual color LED lights, the RF controller features both dimmer and color temperature controller functions. For RGB/RGB+W LED, the LED controller offers brightness dimmer function for each channel, RGB color tone adjustment function and dynamic changing patterns. Multiple zones can be controlled separately or synchronously with endless receivers in each zone. Built- in changing patterns are available and can be saved to each one. Brightness of each R,G,B,W channel can be dimmable separately to achieve millions of changing colors .While working with WIFI-RF converters, the LED strip light controller can be WiFi controlled by APP installed on 105 or Android mobile devices. Waterproof version is available with IP67  rating.LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS
