BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Driver LC 17W 250–700mA bDW SC PRE2
AED0.00
key Features
- Adjustable output current in 1-mA-steps (ready2mains, I-SELECT 2)
- Constant light output function (CLO)
- Power-up fading at AC
- Switch off the driver with fade2zero
- Configurable via ready2mains
- Service monitor to log certain events
- Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification)
- Intelligent Voltage Guard (overvoltage and under voltage monitoring)
- Suitable for emergency escape lighting systems acc. to EN 50172
Housing properties
- Casing: polycarbonate, white
- Type of protection IP20
Engine SLA AC G2 50mm SNC | 28002834
AED0.00
Product description
_ Fits in most existing MR16 / GU10 halogen luminaires
_ 10 W LED Equivalent to 50 W MR16 halogen with higher lumen
output
_ Perfect solution for MR16 / GU10 replacement project
_ Module with integrated electronic, heatsink and optics
_ Compatible with leading and trailing edge phase cut dimmers
_ Dimming range 0.1 to 100 % (depends on dimmer)
_ Eye-catching lens optic with mirrors halogen facettes
_ Long lifetime: L70B50 >50,000 h at tp = 75 °C
_ 5 years guarantee
SR-1009FA
AED0.00
Product Description
The LED controller 5R-1009FA is a universal constant voltage LED strip dimmer controller with 12-36VDC input and output for mono chrome, dual color and RGB/RGBW lights. It is designed with4 channels and maximum SA/channel output. Bui t-in RF receiver enables the LED light controller to be wireless controlled by remote and wall mounted controllers and be compatible with a variety of remotes to control single color, dual color and RGB/RGB+W LED lights especial y LED strip lights. For single co or LED strip, the 5R-1009FA works as LED dimmer to adjust brightness and switch on/off. For CW+WW dual color LED lights, the RF controller features both dimmer and color temperature controller functions. For RGB/RGB+W LED, the LED controller offers brightness dimmer function for each channel, RGB color tone adjustment function and dynamic changing patterns. Multiple zones can be controlled separately or synchronously with endless receivers in each zone. Built- in changing patterns are available and can be saved to each one. Brightness of each R,G,B,W channel can be dimmable separately to achieve millions of changing colors .While working with WIFI-RF converters, the LED strip light controller can be WiFi controlled by APP installed on 105 or Android mobile devices. Waterproof version is available with IP67  rating.DUAL WHITE 14.4W/M LED STRIP LIGHT
AED0.00
Product description
- Wattage: 14.4W/M
- SMD5050
- Lumens: 926lm/m
- Voltage: DC24V
- LED Qty: 60leds/m
- Mains Frequency: 50/60 Hz
- CCT: 3000K + 6000K
- CRI: >80
- Beam Angle: 120°
- Power Factor: 0.9
- IP Rating: IP20
- Dimension: 5000x10x2.5mm
- With 3M adhesive tape back, easy for installation
- Options: ON/OFF, 0-10/DALI Dimmable
- Operating Temperature: -20°C to + 50°C
- Lifetime: 50,000 Hrs.
- Certifications: CE, RoHS
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS
