OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
SR-SBP2801-BLE
* Pricing Available upon Request *
Product Description
SR-SBP2801-BLE enables the realization of energy harvesting wireless switches for lighting, build- ing or industrial automation control systems using Bluetooth® low energy technology.
SR-SBP2801-BLE is mechanically compatible with existing switch elements enabling quick integration into a wide range of designs. Key applications are wall-mounted or portable switches either with up to two rockers or up to four push buttons.
SR-SBP2801-BLE pushbutton transmitters are self-powered (no batteries) and fully maintenance- free. They can therefore be used in all environments including locations that are difficult to reach or within hermetically sealed housings. The required energy is generated by an electro-dynamic energy transducer actuated by an energy bow located on the left and right of the module. This energy bow which can be pushed from outside the module by an appro- priate pushbutton or switch rocker.
When the energy bow is pushed down or released, electrical energy is created and a radio telegram according to the Bluetooth® low energy standard is transmitted. This radio telegram transmits the status of all four contact nipples when the energy bow was pushed down or released. SR-SBP2801-BLE radio telegrams are protected with AES-128 security based on a device-unique private key.
Driver LC 13W 300mA fixC SR SNC 13W 87500571 TRIDONIC
essence series
Product description
- Independent LED driver with cable clamps
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Temperature protection as per EN 61347-2-13 C5e
- KC certificate for LC 15W 350mA fixC SR SNC
- Output current 300 or 350 mA
- Max. output power 13 or 15 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LC 75W 250–550mA flexC lp EXC 75W 28001808 TRIDONIC
excite series non-SELV
Product description
- Constant current LED driver for luminaire installation
- For luminaires of protection class I and protection class II
- Adjustable output current between 250 and 550 mA via ready2mains Programmer or I-SELECT 2 plugs
- Max. output power 75 W
- Up to 94 % efficiency
- Nominal lifetime up to 100,000 h
- 5 years guarantee
COB-Cree 1304
* Pricing Available upon Request *
PRODUCT DESCRIPTION
The XLamp® CXA1304 LED array expands
Cree LED’s family of high‑flux, multi‑die
arrays in a smaller, easy‑to‑use platform.
With XLamp LED lighting‑class reliability,
the CXA1304’s small, uniform emitting
surface enables both directional and
non‑directional lighting applications
including lamp retrofit and luminaire
designs. Available in 2-step, 3‑step and
4-step color consistency, and featuring a
6‑mm optical source, the CXA1304 brings
new levels of flux and efficacy to this form
factor.
SR-2303P
* Pricing Available upon Request *
Product Description
The DALI Dimmer SR-2303P is a constant voltage dimming controller with 4 channel, 5A per channel output, which complies to standard DALI protocol with 4 DALI addresses to control 4 channels separately. The DALI dimmer is designed with newly updated outer shell which features easy connection terminal without screw to ensure easy and fast connection. The DALI address can be manually assigned and shown on the numeric digital display or automatically assigned by master controllers. 4 DALI addresses are available for 4 channels to work separately. 0%-100% smooth dimming can be achieved by the DALI dimmer via logarithmic dimming, which is perfect for human's vision. The DALI dimmer can be compatible with SR-2400TL, SR-2400TG, SR-2400TS, SR-2400LC, SR-2400GC, SR-2400SC and any other high quality DALI masters.
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS