OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
10W SLA AC pc G2 50mm 700lm 2700K 36D SNC 28001935 Tridonic
Product description
_ Fits in most existing MR16 / GU10 halogen luminaires
_ 10 W LED Equivalent to 50 W MR16 halogen with higher lumen output
_ Perfect solution for MR16 / GU10 replacement project
_ Module with integrated electronic, heatsink and optics
_ Compatible with leading and trailing edge phase cut dimmers
_ Dimming range 0.1 to 100 % (depends on dimmer)
_ Eye-catching lens optic with mirrors halogen facettes
_ Long lifetime: L70B50 >50,000 h at tp = 75 °C
_ 5 years guarantee
Driver LC 17W 250–700mA bDW SC PRE2
key Features
- Adjustable output current in 1-mA-steps (ready2mains, I-SELECT 2)
- Constant light output function (CLO)
- Power-up fading at AC
- Switch off the driver with fade2zero
- Configurable via ready2mains
- Service monitor to log certain events
- Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification)
- Intelligent Voltage Guard (overvoltage and under voltage monitoring)
- Suitable for emergency escape lighting systems acc. to EN 50172
Housing properties
- Casing: polycarbonate, white
- Type of protection IP20
30W DALI LED Driver (Constant Voltage) SRP-2305-24-30CV
* Pricing Available upon Request *
Product Description
This 100W DALI DT8 Dimmable LED Driver is in compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, IEC 62386-209:2011, and compatible with universal DALI masters that support DT8 commands. With built-in DALI2 interface, this DALI DT8 device is controlled via a single DALI address. Moreover, this device is equipped with 2-channel DC 24V constant voltage output and high power factor and efficiency. Its dimming method is PWM, with smooth and deep dimming to 0.1%. Besides, this driver has error report function, and supports DALI DT8 Tc type. Its protection grade is IP20, which is suitable for indoor LED lighting applications, with 5-year warranty.
Driver LC 7W 150mA fixC pc SR SNC2 7W 28003342 TRIDONIC
essence series
Product description
- Dimmable constant current LED driver (SELV)
- Independent driver with strain-relief housing
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- Dimmable via leading edge and trailing edge phase dimmers
- Dimming range 5 to 100 % (depending on dimmer)
- For luminaires with F or M and MM as per EN 60598, VDE 0710 and VDE 0711
- Max. output power 6.3 W
- Output current 150 mA
- Nominal lifetime up to 50,000 h
- 5 years guarantee
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS