BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Push Switch Compatible DALI Dimmer SR-2304DIN
AED0.00
* Pricing Available upon Request *
Product Description
The DALI Dimmer SR-2304DIN is a din rail mounted DALI controller that complies with standard DALI protocol and can be compatible with both DALI master and push button switch without DALI signal, which means it can receive both DALI signal and push signal. The DALI dimmer comes with constant voltage output and available in 12VDC, 24VDC and 36VDC. The DALI address can be manually assigned and shown on the numeric digital display or automatically assigned by master controllers. 1-4 DALI addresses can be configurable for 4 channels to work synchronously or separately. 0.1%-100% smooth dimming can be achieved by the DALI dimmer via logarithmic dimming, which is perfect for human's vision.
Driver LC 10W 500mA fixC SR SNC2 10W 87500803 TRIDONIC
AED0.00
essence series
Product description
- Independent driver with strain-relief housing
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- Temperature protection as per EN 61347-2-13 C5e
- Output current 250, 350, 500 or 700 mA
- Max. output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Tridonic PC 3×14 T5 TEC lp 3x14W 87500213 TRIDONIC
AED0.00
* Pricing Available upon Request *
Temperature protection as per EN 61347-2-3 C5eLarge temperature range (for values see table)Automatic start after replacement of defective lampsSafety shutdown of defective lamps and at end of lamp lifeCELMA Energy Efficiency Index A2Nominal life-time up to 30,000 h (at ta 50 °C with a failure rate .
Module SLA DC G2 50mm SNC | 28002836
AED0.00
Product description
_ Fits in most existing MR16 / GU10 halogen luminaires
_ Replacement of 50 W MR16 halogen lamps or 20 W HID lamp
_ Module with integrated heatsink and optics
_ Free choice of variable dimming and non-dimming LED drivers
_ Pre-wired for quick and easy installation
_ Eye-catching lens optic with mirrors halogen facettes
_ Long lifetime: L70B50 >50,000 h
_ 5 years guarantee
SR-2303P
AED0.00
* Pricing Available upon Request *
Product Description
The DALI Dimmer SR-2303P is a constant voltage dimming controller with 4 channel, 5A per channel output, which complies to standard DALI protocol with 4 DALI addresses to control 4 channels separately. The DALI dimmer is designed with newly updated outer shell which features easy connection terminal without screw to ensure easy and fast connection. The DALI address can be manually assigned and shown on the numeric digital display or automatically assigned by master controllers. 4 DALI addresses are available for 4 channels to work separately. 0%-100% smooth dimming can be achieved by the DALI dimmer via logarithmic dimming, which is perfect for human's vision. The DALI dimmer can be compatible with SR-2400TL, SR-2400TG, SR-2400TS, SR-2400LC, SR-2400GC, SR-2400SC and any other high quality DALI masters.
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS