OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
4.8W/M 3000K LED STRIP LIGHT IP20
Product description
- Wattage: 4.8W/M
- SMD2835
- Lumens: 385lm/m
- Voltage: DC24V
- LED Qty: 60leds/m
- Mains Frequency: 50/60 Hz
- CCT: 3000K
- CRI: >80
- Beam Angle: 120°
- Power Factor: 0.9
- IP Rating: IP20
- Dimension: 5000x8x2mm
- Can be cut by 3LEDs(12V),6 LEDs(24v)
- With 3M adhesive tape back, easy for installation
- Options: ON/OFF, 0-10/DALI Dimmable
- Operating Temperature: -20°C to + 50°C
- Lifetime: 50,000 Hrs.
- Certifications: CE, RoHS
Multi-addresses PRO DALI DT8 LED Controller SR-2309Pro-5C
* Pricing Available upon Request *
Product Description
SR-2309PRO-5C is a 7 in 1 professional multi-addresses enabled DALI DT8 control gear which is compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, IEC 62386-209:2011. It is DALI DT8 device with built-in DALI-2 interface. Multi addresses are enabled in this control gear, which means it integrates multi DALI DT8 devices in on control gear. It can be set as single address type or multi-addresses type. The combination of device types can be configured with the buttons and display, and total 7 combinations available: Tc, RGBWAF, XY, 2*Tc, XY+Tc, RGB+Tc, XY+W (DT6).
This control gear is designed with 5 channels PWM output, which enables to control tunable white LEDs, RGB LEDs, RGBW LEDs, RGB+tunable white LEDs depending on the device type configured. One control gear is enough to meet all requirements. This control gear is innovative to be compatible with universal DALI systems, whatever DALI DT8 device types a DALI system support, this control gear supported all DALI DT8 device types.
DALI address can be freely set using the buttons and digital display even without a DALI master controller.
This control gear also supports push dim to control not only brightness but also color temperature and RGB colors even if there is no DALI signal.
Driver LCO 14W 100–500mA 38V one4all NFC C EXC3 14W 87500707 TRIDONIC
excite NFC outdoor series Product description
- Dimmable built-in constant current LED driver
- Dimming range 5 – 100 % (min. 5 mA)
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current adjustable between 100 – 500 mA via NFC, DALI or ready2mains Programmer
- Max. output power 14 W
- Up to 87 % efficiency
- Lowest power input on stand-by < 0.16 W
- Nominal lifetime of 100,000 h and 8 years guarantee
Constant Current 350mA Dual Color DT8 DALI Dimmer SR-2309FA3-CCT
* Pricing Available upon Request *
Product Description
SR-2309FA3-CCT is a 4 channel constant current 350mA output dual color DT8 DALI dimmer that complies to the latest IEC 62386-209:2011 standard and supports DT8 device commands. This device is controlled via a single DALI address and compatible with universal DALI master controllers that supports DT8 commands. DT8 commands enable easy color temperature adjusting between warm white and cool white. DALI address can be manually assigned and displayed via digital display. It is configurable via DALI software tool and DALI USB interface.
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS