BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Driver LCBI 15W 350/500/700mA BASIC phase-cut lp 15W 89800257 TRIDONIC
AED0.00
advanced series
Product description
- Dimmable via leading edge and trailing edge phase dimmers
- Output dimmed analogue (current amplitude)
- Dimming range typ. 5 to 100 % (depending on dimmer)
- Type of protection IP20
- Push-in terminals
- Connecting cable, wire cross-section 0.5 â 1.5 mm²
- SELV
- 350, 500 or 700 mA output current
- Output power 15/16 W
- Nominal lifetime of 50,000 h (at max ta 50 °C with a failure rate ⤠0.2 % per 1,000 h)
- 5 years guarantee
SR-2102BEA-RJ45
AED0.00
* Pricing Available upon Request *
Product Description
The SR-2102BEA-RJ45 is a WiFi compatible constant voltage DMX512 decoder with 3 channel or 4 channel selectable, 8A per channel output and available in 12VDC, 24VDC and 36VDC output. The DMX512 decoder is designed with DMX512 compliant control interface, which enables users to set DMX address freely and shows the address on digital numeric display. Designed with RJ45 port, the DMX512 decoder could be connected to WIFI & bluetooth signal, could be RF remote controlled or IOS/Android programmed by WiFi. (through a DMX master SR-2817DMX or SR-2816)
Engine SLA AC G2 50mm SNC | 28002834
AED0.00
Product description
_ Fits in most existing MR16 / GU10 halogen luminaires
_ 10 W LED Equivalent to 50 W MR16 halogen with higher lumen
output
_ Perfect solution for MR16 / GU10 replacement project
_ Module with integrated electronic, heatsink and optics
_ Compatible with leading and trailing edge phase cut dimmers
_ Dimming range 0.1 to 100 % (depends on dimmer)
_ Eye-catching lens optic with mirrors halogen facettes
_ Long lifetime: L70B50 >50,000 h at tp = 75 °C
_ 5 years guarantee
Driver LC 10W 250/350/500/700mA fixC SR SNC 10W 87500580 TRIDONIC
AED0.00
essence series
Product description
- Independent LED driver with cable clamps
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Temperature protection as per EN 61347-2-13 C5e
- Output current 250, 350, 500 or 700 mA
- Max. output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS
