OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
SR-2108F8-4CH
Product Description
SR-2108FB-4CHis a 4 channels constant voltage OMX & ROM controller that supports real16 bit PWM resolute on. The DMX controller s designed with both master mode and slave mode which are easy to switch. It features full support to the all test DMX512,DMX512(1990),DMX512 -A and RDMV1.0 (E1.20 - 2006 ESTA Standard) protocols. The OMX decoder is designed with 4 channels, Sà per channel constant voltage output and available in 12VDC, 24VDC and 36VDC.The OMX controller is designed with easy wiring terminals that do not require screws. ROM bi-direction communication function enables the DMXS12 master console to detect and display decoder  inform at on and set OMX address. While under decoder mode ,a variety of features can be set via the visible numeric digital display and the buttons such as DMX address, output channel quantity, PWM output reso ut on (8 bit or 16 bit), PWM output frequency, GAMMA ray dimming curve value and OMX decoding mode. There are total4 PWM output channel s with common anode and OMX channel quant ty can be settable from 1CH to 4CH.OMX address can be set and displayed via the numeric digital display. High frequency 16bit and ow frequency 8bit PWM output resolution are available and switchable, and default setting is 16bit.10 levels of PWM output  frequency are optional from 500Hz-30kHz,defau t setting is 1kHz.Gamma ray dimming curve value is adjustable from 0.1-9.9,and logarithmic dimming and linear dimming are optional. OMX Decoding modes are optional and enable to  adjust brightness of each output channel master brightness of all output channels and strobe effects, and defau t modeis dp1.1. While under master mode, the DMXS12 controller can control RGB LEO lighting with 8levels brightness adjustment, 32 built-in programs for RGB static colors or dynamic co or changing patterns, and 16 levels changing speed adjustable .Also it can control color temperature of CW and WW dual color LED lighting.
Driver LC 25W 600mA fixC SC SNC2 25W 87500734 TRIDONIC
essence series
Product description
- Fixed output LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Independent LED driver with cable clamps
- Constant current LED driver
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current 350, 500, 600 or 700 mA
- Max. output power 25 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
SR-2701S-N
* Pricing Available upon Request *Â
Product Description
The SR-2701S-N is a DALI relay module plus DALI to 0/1-10V converter which is capable of switching both AC and DC Loads and controlling 0/1-10y climbable Loads_ The max_ switching voltage for AC loads is 250V, and the max. switching voltage for DC Loads is 30V The DALL RM enables to integrate existing loads which do not have DALJ input into DALI circuit and switch on/off the Loads The DALI to 13/1-10y converter enables to integrate Q/1-10VdimmabLe Loads into DALI circuit and control the loads via DAL'. The max Load capacity for convent on2L incandescent and halogen Light sources is 10.0°W @ 2301, and max. Load capacity for LED Light sources is 300W @ 2301_ It is easy to be installed into existing standard wall boxes or mounted on 35rnm DIN rail with an extra mounting bracket.
SR-2422NK4-DA2
* Pricing Available upon Request *
Product Description
The keypad SR-2422NK4-DA2 is a DALI-2 certified DALI-2 control device with 4 push buttons according to IEC62386-101, IEC62386-103, IEC62386-301 and IEC62386-332. It is designed with sleek and low profile appearance. The input device supports feedback functionality and provides 8 LEDs. It is suitable for integration and in combination with DALI-2 compliant central control units. The push button device is multimaster capable, multiple modules can be installed on the DALI- line. The DALI-2 input device is DALI bus powered, no extra power supply required. It is easily configurable via DALI-2 compliant central controller USB interface.
This DALI-2 push button is available with different colors and materials for different application environments.
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS