BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Driver LC 75W 900–1800mA flexC lp EXC 75W 28000684 TRIDONIC
AED0.00
excite series SELV Product description
- Constant current LED driver for luminaire installation
- For luminaires of protection class I and protection class II
- Adjustable output current between 900 and 1,800 mA via ready2mains Programmer or I-SELECT 2 plugs
- Max. output power 75 W
- Up to 91 % efficiency
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LCA 17W 250–700mA one4all SC PRE 17W 28000674 TRIDONIC
AED0.00
premium series
Product description
- NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
- Dimmable built-in constant current LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Dimming range 1 to 100 %
- For luminaires of protection class I and protection class II
- Output current adjustable between 250 â 700 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI
- Max. output power 17 W
- Up to 86 % efficiency
- Power input on stand-by < 0.2 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LCBI 15W 350/500/700mA BASIC phase-cut lp 15W 89800256 TRIDONIC
AED0.00
advanced series
Product description
- Dimmable via leading edge and trailing edge phase dimmers
- Output dimmed analogue (current amplitude)
- Dimming range typ. 5 to 100 % (depending on dimmer)
- Type of protection IP20
- Push-in terminals
- Connecting cable, wire cross-section 0.5 â 1.5 mm²
- SELV
- 350, 500 or 700 mA output current
- Output power 15/16 W
- Nominal lifetime of 50,000 h (at max ta 50 °C with a failure rate ⤠0.2 % per 1,000 h)
- 5 years guarantee
60X60-TR-28002342
AED0.00
key Features
Color temperatures 3,000, 4,000 and 6,500 K ⢠Two luminous flux range variants 2,800 or 3,800 lm ⢠Efficacy of the module up to 120 lm/W ⢠High colour rendering index CRI > 80 ⢠Small colour tolerance MacAdam 41 ⢠Small luminous flux tolerances ⢠UGR < 19 Mechanical properties ⢠Module dimension 595 x 595 mm and 620 x 620 mm System solution ⢠LED system solution with outstanding system efficacy up to 101 lm/WDriver LCO 90W 200–1050mA 165V one4all NFC C EXC3 90W 87500717 TRIDONIC
AED0.00
excite NFC outdoor series
Product description- Dimmable built-in constant current LED driver
- Dimming range 5 â 100 % (min. 10 mA)
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current adjustable between 200 â 1,050 mA via NFC, DALI or ready2mains Programmer
- Max. output power 90 W
- Up to 92.5 % efficiency
- Lowest power input on stand-by < 0.16 W
- Nominal lifetime of 100,000 h and 8 years guarantee
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS