BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Driver LC 30W 700mA fixC SR ADV2 30W 87500865 TRIDONIC
AED0.00
advanced series
Product description
- Independent driver with strain-relief housing
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- For luminaires of protection class II
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Output current 700 mA
- Temperature protection as per EN 61347-2-13 C5e
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Module SLA DC G2 50mm SNC | 28001947
AED0.00
Product description
_ Fits in most existing MR16 / GU10 halogen luminaires
_ Replacement of 50 W MR16 halogen lamps or 20 W HID lamp
_ Module with integrated heatsink and optics
_ Free choice of variable dimming and non-dimming LED drivers
_ Pre-wired for quick and easy installation
_ Eye-catching lens optic with mirrors halogen facettes
_ Long lifetime: L70B50 >50,000 h
_ 5 years guarantee
Driver LC 10W 150–400mA bDW SC PRE2 | 28002411
AED0.00
Product description
⢠NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance) ⢠Dimmable built-in constant current LED driver ⢠Can be either used build-in or independent with clip-on strain-relief (see accessory) ⢠Forms automatically a wireless communication network with up to 250 nodes ⢠Dimming range 1 â 100 % ⢠For luminaires of protection class I and protection class II ⢠Adjustable output current between 150 and 400 mA via ready2mains⢠Programmer or I-SELECT 2 plugs ⢠Max. output power 10 W ⢠Up to 82 % efficiency ⢠Power input on stand-by < 0.35 W ⢠Nominal lifetime up to 100,000 h ⢠5 years guarantee (conditions at www.tridonic.com)Housing properties
⢠Casing: polycarbonate, white ⢠Type of protection IP20Interfaces
⢠basicDIM Wireless ⢠ready2mains⢠(configuration via mains) ⢠Terminal blocks: 45° push terminalsFunctions
⢠Adjustable output current in 1-mA-steps (ready2mainsâ¢, I-SELECT 2) ⢠Constant light output function (CLO) ⢠Power-up fading at AC ⢠Switch off the Driver with fade2zero ⢠Configurable via ready2mains⢠⢠Service monitor to log certain events ⢠Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) ⢠Suitable for emergency escape lighting systems acc. to EN 50172Driver LC 53W 250-350mA flexC lp ADV 53W 28002468 TRIDONIC
AED0.00
advanced series non-SELV Product description
- LED Constant current LED driver for luminaire installation
- New version DC operating with EL marking
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current adjustable between 250 â 350 mA
- Max. output power 53 W
- Up to 90.5 % efficiency
- Nominal lifetime up to 100,000 h
- 5 years guarantee
LEDDOMAIN DR-LD-150W-24D-IP20 LED DRIVER
AED0.00
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS