BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
SR-2400RB-NF-DIM
AED0.00
* Pricing Available upon Request *
Product Description
The SR-2400RB-NF-DIM is a newly released DALI MCU with DALI output for dimming of luminaires or transformers with DALI interface. Without knob and front plate, the DALI MCU is designed with a built-in DALI power supply with 100-240VAC wide input which can power DALI bus while connected to AC mains. While not connected to AC mains, the DALI rotary dimmer can be powered by DALI bus. The DALI manual control unit is updated with a standard 4mm diameter rotary axis that is perfect to use in Europe. Each MCU can power up to 50 DALI ECGs with max. 100mA DALI output. Maximum 2 active DALI MCUs powered by AC mains and 2 passive MCUs powered by DALI bus can connect to DALI bus and control up to 100 DALI ECGs for multiple control points. Dimming solutions are easy and reliable, no DALI addressing required. The manual control unit can save current brightness as scene and remember last scene/brightness when turn on next time. Double click enables users to adjust the brightness to 100%. Compatible with common European size frames and accessories, the DALI manual control unit is easy to install.
SR-2830CDMX
* Pricing Available upon Request *
Product Description
RGB & dual color DMX512 master SR-2830CDMX is a full touch controller that complies with standard protocol DMX512(1990) and offers fast and accurate color tone adjustment and independent brightness dimming of RGB, warm white and cold white. Designed with touch color line in the middle, the DMX512 controller can adjust color tone, color temperature and brightness for RGB, WW and CW LED lights. Each controller can control 4 different zones separately or synchronously with endless decoders in each zone and 2 kelvin or scenes can be saved for each zone. Independent smooth dimming of R, G and B enables the DMX master to achieve millions of colors. 256 level brightness adjustment of each white enables the controller to achieve millions of color temperature. Humanized memory function enables the controller to remember the last scene after turn off or cut off. Humanization backlighting design enables the RGB controller to be found even in the dark.
SR-2108F8-4CH
AED0.00
Product Description
SR-2108FB-4CHis a 4 channels constant voltage OMX & ROM controller that supports real16 bit PWM resolute on. The DMX controller s designed with both master mode and slave mode which are easy to switch. It features full support to the all test DMX512,DMX512(1990),DMX512 -A and RDMV1.0 (E1.20 - 2006 ESTA Standard) protocols. The OMX decoder is designed with 4 channels, Sà per channel constant voltage output and available in 12VDC, 24VDC and 36VDC.The OMX controller is designed with easy wiring terminals that do not require screws. ROM bi-direction communication function enables the DMXS12 master console to detect and display decoder  inform at on and set OMX address. While under decoder mode ,a variety of features can be set via the visible numeric digital display and the buttons such as DMX address, output channel quantity, PWM output reso ut on (8 bit or 16 bit), PWM output frequency, GAMMA ray dimming curve value and OMX decoding mode. There are total4 PWM output channel s with common anode and OMX channel quant ty can be settable from 1CH to 4CH.OMX address can be set and displayed via the numeric digital display. High frequency 16bit and ow frequency 8bit PWM output resolution are available and switchable, and default setting is 16bit.10 levels of PWM output  frequency are optional from 500Hz-30kHz,defau t setting is 1kHz.Gamma ray dimming curve value is adjustable from 0.1-9.9,and logarithmic dimming and linear dimming are optional. OMX Decoding modes are optional and enable to  adjust brightness of each output channel master brightness of all output channels and strobe effects, and defau t modeis dp1.1. While under master mode, the DMXS12 controller can control RGB LEO lighting with 8levels brightness adjustment, 32 built-in programs for RGB static colors or dynamic co or changing patterns, and 16 levels changing speed adjustable .Also it can control color temperature of CW and WW dual color LED lighting.ZG9101SAC-HP
AED0.00
Product Description
The SR-ZG9101SAC-HP is an innovative AC phase-cut dimmer with ZigBee control interface. The AC dimmer is designed with 100-240VAC wide input and output,1channeland maximum 400W output.The ZigBee AC dimmer is available with both leading edge dimming version and trailing edge dimming version for choosing. The innovative minimum brightness setting function enables users to set a minimum brightness and dim from this minimum brightness to 100% brightness. Also it is easy to delete the minimum brightness. The AC dimmer can be compatible with universal ZigBee coordinator or gateway controller to be paired to the network. It is controllable from your ZigBee gateway interface or remote controllers that are added to the network and bind with the dimmer. The zigbee device is based on zigbee 3.0,it can be linked to and controled by max. 30 zigbee remotes that support zigbee tight link through touchlink. lt also supports the new zigbee green power feature, and can bind to and be controled by max. 20 zigbee green power remotes direct y without zigbee hub or gateway.TRIDONIC 87501052 LC 100W 24V SC SNC2 LED DRIVER
AED0.00
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS