BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
SR-SV9030A-PIR-V 0-1 OV BLE Fixture-Integrated PIR Sensor Controller | 70300025
AED0.00
Product Description
ENERGY SAVINGS
⢠Low/High-end trimming ⢠Daylight harvesting ⢠Occupancy/Vacancy detection ⢠Auto and advanced demand response programs ⢠Time-of-Day dimming schedule ⢠Energy monitoringCOMFORT & CONVENIENCE
⢠Advanced occupancy detections ⢠Light-level stability ⢠Configurable dim-and-linger occupancy ⢠Personalized setting profile ⢠Work with kinetic switch keypad and dimmer wallstation ⢠Multi-scenes controlSENSING
⢠Mounting height: 3m ⢠Recommended mounting height: 2.5m ⢠Detection area diameter: 5m@2.5mENVIRONMENT AND APPROBATION
⢠Operating temperature: 0° C to 45° C ⢠Agency approbations: CE/Ro HS/UL Coming soon ⢠Warranty: 5 yearsBASIC DIM ILD Controller and Sensor 86459377
AED0.00
4 Channels DALI DT8 Dimmer with Built-in Master Function SR-2309FA-OLED
AED0.00
* Pricing Available upon Request *
Product Description
Product Description
SR-2309FA-OLED is the world first DALI certified DT8 dimmer with built-in DALI master function and OLED display for visible manual configuration. The LED dimmer is designed with 4 PWM outputs which are controlled via a single DALI address. DT8 color types all in one: Tc, RGBWA, XY+ Tc, RGB+ Tc can be set. It enables to address (00-63) and group (0-15) the dimmer. It enables to predefine and recall total 16 DALI scenes to the dimmer. PWM output frequency can be set from 250Hz-30KHz which ensures ultra smooth color control.
It enables to set a Min. level for dimming between this level to Max. level. Output level and DT8 color can be set manually. DALI default parameters such as fade time, fade rate, power on level, system failure level can be set .
SR-2300TR-RGBW-EU(DT8)
* Pricing Available upon Request *
Product Description
The DALI master SR-2300TR-G4-RGBW is a touch RGBW DALI controller which adopts high strength and ultra sensitive tempered glass panel with touch color wheel design to offer accurate and fast color tone adjustment and brightness adjustment functions to RGB+W LED lighting, the RGBW controllercomplies to IEC 62386-102, IEC 62386-207, IEC 62386-209 and can be compatible with DALI products from other international corporations. The DALI master can control up to 4 light zones (EU version) or 3 light zones (US version). For DT6 version, each light zone can control 4 DALI addresses, and enables to set starting DALI address. For DT8 version, each light zone can control 1 DALI group, enables to set start DALI group number. The touch panel can save and recall 4 scenes (EU Version). 10 built-in color sequences are available. The RGBW DALI master controller can detect DALI bus and multiple controllers can be installed in one channel DALI bus. Compatible with most of our DALI slave controllers that are available in both constant voltage and constant current versions, the RGBW touch controller can control different types of LED lighting. 10 built-in color sequences are available.
This DALI controller is available with both 100-240VAC input and 12-24VDC input versions. AC input version is designed with built-in 100mA DALI power supply to power up to 50 DALI ECG and it can also be powered by DALI bus while not connected to AC mains. Max. 100 DALI ECG can be controlled by 4 AC input DALI touch panels via broadcast on a control circuit with 2 connected to AC mains and 2 powered by DALI bus.
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS
