BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Driver LCA 35W 150–700mA one4all lp PRE 35W 28000654 TRIDONIC
AED0.00
premium series SELV
Product description
- NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
- Dimmable built-in constant current LED driver
- Dimming range 1 to 100 %
- For luminaires of protection class I and protection class II
- Output current adjustable between 150 â 700 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI
- Max. output power 35 W
- Up to 88 % efficiency
- Power input on stand-by < 0.2 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
DMX-50-500-1750-F1P1
AED0.00
Product keywords
- PWM Frequency: 0~100%, LED start at 0.1% possible.
- Power Factor: PF>0.99/115Vac, PF>0.95/230Vac, at full load â¤4KHz
- Input Current: 115Vacâ¤0.6A, 230Vacâ¤0.3A
- Current Accuracy: Output Power Range: ±3%
- Working Temperature: ta: -20°C ~ 55°C tc: 80°C 20 ~ 95%RH, non-condensing-40 ~ 80°C, 10~95%RH ±0.03%/°C(0-50°C)
- Working Humidity: Storage Temp., Humidity: Temp.
- Â Coefficient: Vibration: 10~500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes 5W~50W
- Operating Voltage: 10-54Vdc Non-load Output Voltage:
- Max. Output Voltage: 0Vdc 58Vdc THD: â¤10% at 115Vac, â¤20% at 230Vac, at full load
- Control Surge Capability: L-N: 1kV DMX512/RDM, Push DIM
SRPC-2309PRO-24-200CVF
* Pricing Available upon Request *
Product Description
With the maximum output power of 200W, this 4-in-1 200W DALI DT8 LED Driver is in compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, IEC 62386-209:2011. Featured with built-in DALI-2 interface and 4-channel 12VDC/24VDC constant voltage output, this device has a full isolated metal casing. Its PF is greater than 0.98 and its efficiency is greater than 93%. For this LED driver, 4 universal device types: primary N, Tc, XY coordinate and RGBW, can be set by the buttons. Besides, only 1 address is required to control 4 outputs separately under primary N mode. This driver is suitable for indoor LED lighting applications with 5-year warranty.
SR-2830AS-1-10V
* Pricing Available upon Request *
Product Description
0-10V dimmer SR-2830A-1-10V is a full touch LED controller which outputs 1-10V signal and offers both switch on/off and smooth brightness dimming functions. Adopting high strength ultra sensitive touch glass panel, and designed with touch slider, the 0-10V dimmer switch features accurate smooth dimming and switching functions without any flickering. 0.1% to 100% smooth dimming range without any flickering can be very comfortable for human eyes. Humanized back lighting function enables the touch panel to be found even in the dark. The touch dimmer is powered by a 24VDC power supply and can be compatible with existing standard size 86*86mm wall boxes.
Driver LCO 90W 200–1050mA 165V one4all NFC C EXC3 90W 87500717 TRIDONIC
AED0.00
excite NFC outdoor series
Product description- Dimmable built-in constant current LED driver
- Dimming range 5 â 100 % (min. 10 mA)
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current adjustable between 200 â 1,050 mA via NFC, DALI or ready2mains Programmer
- Max. output power 90 W
- Up to 92.5 % efficiency
- Lowest power input on stand-by < 0.16 W
- Nominal lifetime of 100,000 h and 8 years guarantee
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS