OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
EM converterLED BASIC NiCd/NiMH 50 V |89800558
Properties
_ Non maintained operation _ 1 or 3 h rated duration _ Operating time selectable with plug (duration link) _ Compatible with all dimmable and non-dimmable constant current LED driver (see data sheet, LED driver compatibility) _ 3-pole technology: 2-pole LED module changeover and delayed power switching for the LED driver _ Automatic shutdown of output if LED load is out of range _ Constant power output _ Maximum light output for all LED modules _ Electronic charge system _ Deep discharge protection _ Short-circuit-proof battery connection _ Polarity reversal protection for batteryBatteries
_ High-temperature cells _ NiCd or NiMH batteries _ D, Cs or LA cells _ 4 year design life _ 1 year guarantee _ For battery compatibility refer to data sheet
SR-2400RB-RGBW(DT8)
* Pricing Available upon Request *
Product Description
The SR-2400RB-RGB is a RGB DT8 DALI rotary master with DALI output for dimming and RGB color adjusting of DALI DT8 devices. It supports dimming commands and DT8 commands and can be compatible with universal DT8 devices. It is a DALI master control unit designed with a built-in DALI power supply with 100-240VAC wide input which can power DALI bus while connected to AC mains. While not connected to AC mains, the rotary dimmer can be powered by DALI bus. The DALI master controller is updated with a standard 4mm diameter rotary axis that is perfect to use in Europe. Each MCU can power up to 50 DALI ECGs with max. 100mA DALI output. Maximum 2 active DALI MCUs powered by AC mains and 2 passive MCUs powered by DALI bus can connect to DALI bus and control up to 100 DALI ECGs for multiple control points. Dimming solutions are easy and reliable, no DALI addressing required. The master controller controls all devices on the circuit through broadcast. Double clicking the knob will switch from dimming to RGB color adjusting. Compatible with common European size accessories, the DALI manual control unit is easy to install.
DALI DT8 Dual Color LED Dimmer SR-2309FA-CCT
* Pricing Available upon Request *
Product Description
SR-2309FA-CCT is a 4 channel constant voltage dual color DT8 DALI dimmer that complies to the latest IEC 62386-209:2011 standard and supports DT8 device commands. This device is controlled via a single DALI address and compatible with universal DALI master controllers that supports DT8 commands. DT8 commands enable easy color temperature adjusting between warm white and cool white. DALI address can be manually assigned and displayed via digital display. It is configurable via DALI software tool and DALI USB interface.
SR-2701S-N
* Pricing Available upon Request *Â
Product Description
The SR-2701S-N is a DALI relay module plus DALI to 0/1-10V converter which is capable of switching both AC and DC Loads and controlling 0/1-10y climbable Loads_ The max_ switching voltage for AC loads is 250V, and the max. switching voltage for DC Loads is 30V The DALL RM enables to integrate existing loads which do not have DALJ input into DALI circuit and switch on/off the Loads The DALI to 13/1-10y converter enables to integrate Q/1-10VdimmabLe Loads into DALI circuit and control the loads via DAL'. The max Load capacity for convent on2L incandescent and halogen Light sources is 10.0°W @ 2301, and max. Load capacity for LED Light sources is 300W @ 2301_ It is easy to be installed into existing standard wall boxes or mounted on 35rnm DIN rail with an extra mounting bracket.
Driver LCU 150W 12V indoor IP20 150W 24166332 TRIDONIC
excite series 12 V – not dimmable (IP20)
Product description
- Constant voltage LED driver
- Universal input voltage range
- Constant output voltage
- Nominal lifetime up to 50,000 h (at ta 40 °C with a failure rate ≤ 0.2 % per 1,000 h)
- 5 years guarantee
- Complies with CLASS C from minimum to maximum load range according to EN 61000-3-2
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS