OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
SR-SB9040A-S
Key Features
- RF+Bluetooth micro smart dimmer
- Can operate under two-... ire connection with no neutral lead or three-wire connection with neutral lead
- Both leading edge version and trailing edge version are available for choosing. factory default is trailing edge
- Enables to control ONIOFF and light intensity of connected load
- Controlled through both smart App and remote controls, no gateway required
- Easy & quick pairing to the smart App by simply pushing the reset button, supports voice control through Alexa
- Mesh network, much longer control distance: transmits received signal to neighbor devices
- Up to 30m transmission distance between every two neighbor devices
- Encrypted two-way communication, quick status feedback. safe & reliable data transmission
- Compatible with universal REA-Bluetooth remotes: each LED controller can pair to max. 6 remotes
- Cloud control is available for remote access. works with Amazon Alexa and Google Home
- Implemented algorithm of smart light source detection
- Auto-adjustment of the appropriate control mode to connected load
- Soft start function
- Memory of the last lighting level settings
- Works with various types of switches — momentary. toggle. three-way. etc.
- To be installed in wall switch boxes of dimensions allowing for installation
- The Bypass is an extension unit.
Driver LCA 15W 180-350mA flexC PH-C SR ADV 15W 87500627 TRIDONIC
advanced series
Product description- Dimmable constant current LED driver (SELV)
- Independent LED driver with cable clamps
- Dimmable via leading edge and trailing edge phase dimmers
- Dimming range 5 to 100 % (depending on dimmer)
- For luminaires of protection class I and protection class II
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Temperature protection as per EN 61347-2-13 C5e
- Selectable output current between 180, 250 and 350 mA
- Max. output power 15 W
- Up to 81 % efficiency
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Multi-addresses PRO DALI DT8 LED Controller SR-2309Pro-5C
* Pricing Available upon Request *
Product Description
SR-2309PRO-5C is a 7 in 1 professional multi-addresses enabled DALI DT8 control gear which is compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, IEC 62386-209:2011. It is DALI DT8 device with built-in DALI-2 interface. Multi addresses are enabled in this control gear, which means it integrates multi DALI DT8 devices in on control gear. It can be set as single address type or multi-addresses type. The combination of device types can be configured with the buttons and display, and total 7 combinations available: Tc, RGBWAF, XY, 2*Tc, XY+Tc, RGB+Tc, XY+W (DT6).
This control gear is designed with 5 channels PWM output, which enables to control tunable white LEDs, RGB LEDs, RGBW LEDs, RGB+tunable white LEDs depending on the device type configured. One control gear is enough to meet all requirements. This control gear is innovative to be compatible with universal DALI systems, whatever DALI DT8 device types a DALI system support, this control gear supported all DALI DT8 device types.
DALI address can be freely set using the buttons and digital display even without a DALI master controller.
This control gear also supports push dim to control not only brightness but also color temperature and RGB colors even if there is no DALI signal.
LD-2880 DOWN LIGHT
PRODUCT DESCRIPTION:
Housing - Die cast aluminium solvent free powder coated with choice of RAL colors
Diffuser - Tempered clear or frosted glass.
Reflector - Tiles pattern reflector made by highly specular anodized aluminium
LED - reducing energy consumption with L80/B10/F10 50,000 hrs lifetime.
Standards - manufactured in accordance with tested as per PTPS IEC 62722
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS