OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Driver LC 10W 250mA fixC SR SNC2 10W 87500801 TRIDONIC
essence series
Product description
- Independent driver with strain-relief housing
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- Temperature protection as per EN 61347-2-13 C5e
- Output current 250, 350, 500 or 700 mA
- Max. output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Constant Voltage DALI Dimmer SR-2304B(WP)
* Pricing Available upon Request *
Product Description
The DALI Dimmer SR-2304B is a constant voltage dimming controller with 4 channel, 5A per channel output, which complies to standard DALI protocol with 1 DALI address to control 4 channels synchronously. The DALI address can be manually assigned and shown on the numeric digital display or automatically assigned by master controllers. 1-4 DALI addresses can be configurable for 4 channels to work synchronously or separately. 0.1%-100% smooth dimming can be achieved by the DALI dimmer via logarithmic dimming, which is perfect for human's vision. The DALI dimmer can not only be compatible with DALI masters, but also push switch to get dim and switch functions under the situation without DALI signal.
Driver LC 10W 250mA fixC SC SNC2 10W 87500795 TRIDONIC
essence series
Product description
- Fixed output LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Independent LED driver with cable clamps
- Constant current LED driver
- For luminaires of protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current 250, 350, 500 or 700 mA
- Max. output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
SR-2400RB-RGBW(DT8)
* Pricing Available upon Request *
Product Description
The SR-2400RB-RGB is a RGB DT8 DALI rotary master with DALI output for dimming and RGB color adjusting of DALI DT8 devices. It supports dimming commands and DT8 commands and can be compatible with universal DT8 devices. It is a DALI master control unit designed with a built-in DALI power supply with 100-240VAC wide input which can power DALI bus while connected to AC mains. While not connected to AC mains, the rotary dimmer can be powered by DALI bus. The DALI master controller is updated with a standard 4mm diameter rotary axis that is perfect to use in Europe. Each MCU can power up to 50 DALI ECGs with max. 100mA DALI output. Maximum 2 active DALI MCUs powered by AC mains and 2 passive MCUs powered by DALI bus can connect to DALI bus and control up to 100 DALI ECGs for multiple control points. Dimming solutions are easy and reliable, no DALI addressing required. The master controller controls all devices on the circuit through broadcast. Double clicking the knob will switch from dimming to RGB color adjusting. Compatible with common European size accessories, the DALI manual control unit is easy to install.
DMX-50-500-1750-F1P1
Product keywords
- PWM Frequency: 0~100%, LED start at 0.1% possible.
- Power Factor: PF>0.99/115Vac, PF>0.95/230Vac, at full load ≤4KHz
- Input Current: 115Vac≤0.6A, 230Vac≤0.3A
- Current Accuracy: Output Power Range: ±3%
- Working Temperature: ta: -20°C ~ 55°C tc: 80°C 20 ~ 95%RH, non-condensing-40 ~ 80°C, 10~95%RH ±0.03%/°C(0-50°C)
- Working Humidity: Storage Temp., Humidity: Temp.
- Â Coefficient: Vibration: 10~500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes 5W~50W
- Operating Voltage: 10-54Vdc Non-load Output Voltage:
- Max. Output Voltage: 0Vdc 58Vdc THD: ≤10% at 115Vac, ≤20% at 230Vac, at full load
- Control Surge Capability: L-N: 1kV DMX512/RDM, Push DIM
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS