BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Universal Series DALI Dimmer with Four Channels SR-2304P
AED0.00
* Pricing Available upon Request *
Product Description
This universal series DALI dimmer is a DALI-2, CE and FC certified device, with 12-36VDC power input. Its four channels enable to set addresses from one to four. With manual set button, the DALI address setting can be operated both manually and automatically. This dimmer is in compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, and can match all DALI systems in the market, so that you can rest assured to use it. Moreover, this device can work with power repeater to expand output power unlimitedly. DALI address digital display allows digits to be showed clearly.
Driver LC 10W 350mA fixC SR SNC2 10W 87500802 TRIDONIC
AED0.00
essence series
Product description
- Independent driver with strain-relief housing
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- Temperature protection as per EN 61347-2-13 C5e
- Output current 250, 350, 500 or 700 mA
- Max. output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LC 75W 250-400mA 220V o4a lp ADV 75W 87500728 TRIDONIC
AED0.00
advanced DALI non-SELV series
Product description- Dimmable built-in constant current LED driver
- Dimming range 10 â 100 % (min. 25 mA)
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Adjustable output current between 250 and 400 mA via I-SELECT 2 plugs
- Max. output power 75 W
- Up to 93 % efficiency
- Power input on stand-by < 0.4 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LC 40W 1050mA fixC SC SNC2 40W 87500745 TRIDONIC
AED0.00
essence series Product description
- Fixed output LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Independent LED driver with cable clamps
- Constant current LED driver
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current 900 or 1,050 mA
- Max. output power 40 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Tridonic PC 3×14 T5 TEC lp 3x14W 87500213 TRIDONIC
AED0.00
* Pricing Available upon Request *
Temperature protection as per EN 61347-2-3 C5eLarge temperature range (for values see table)Automatic start after replacement of defective lampsSafety shutdown of defective lamps and at end of lamp lifeCELMA Energy Efficiency Index A2Nominal life-time up to 30,000 h (at ta 50 °C with a failure rate .
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS