OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
SR-2300NTR-CCT-EU(DT8)-AC
* Pricing Available upon Request *
Product Description
is DALI Dual Color Touch Sensitive Controller has glass interface, and both white and black are available. This control complies DALI standard protocol IEC 62386-102, IEC 62386-207, IEC 62386-209 and in compliance with DALI products from other international incorporation. Besides, this device enables to control 1 DALI Group and 4 DALI Scenes, set start DALI group number (0-15) and scene number (0-15) by rotary switches on the back, and support DT8 devices. Its color temperature can be adjusted according to DALI specifications of Device Type 8 and Color Type Tc, and each DT8 device is controlled via a single DALI address.
Driver LC 50W 100–400mA 140V po4a NFC h16 PRE3 50W 28002372 TRIDONIC
Powered DALI premium NFC non-SELV series
Product description
- NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
- Dimmable built-in constant current LED driver
- Dimming range 1 to 100 %
- For luminaires of protection class I and protection class II
- Adjustable output current between 100 and 400 mA via NFC, DALI, I-SELECT 2 Plugs or ready2mains
- Max. output power 50 W
- Up to 89 % efficiency
- Power input on stand-by < 0.2 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
SR-2300TS-DIM-EU
* Pricing Available upon Request *
Product Description
The SR-2300TS-DIM is a touch control dimmer switch with DALI output which complies to standard DALI protocol to dim and switch 4 light zones. Each DALI bus can install multiple dimmer switches. The high strength tempered glass panel offers smooth dimming and switch functions without any flickering. The LED dimmer complies to standard DALI protocol and can be compatible with DALI products from other international corporations. The DALI master can control up to 4 zones with 3 scenes saved for each zone. Available in standard European size and US size as well, the dimmer switch can be installed easily. Compatible with most of our DALI slaves that available in constant voltage and constant current versions, the DALI touch dimmer switch can control different types of LED lighting.
This DALI controller is available with both 100-240VAC input and 12-24VDC input versions. AC input version is designed with built-in 100mA DALI power supply to power up to 50 DALI ECG and it can also be powered by DALI bus while not connected to AC mains. Max. 100 DALI ECG can be controlled by 4 AC input DALI touch panels via broadcast on a control circuit with 2 connected to AC mains and 2 powered by DALI bus.
EM converterLED BASIC 203 NiCd/NiMH 50V | 89800559
Properties
_ Non maintained operation _ 1 or 3 h rated duration _ Operating time selectable with plug (duration link) _ Compatible with all dimmable and non-dimmable constant current LED driver (see data sheet, LED driver compatibility) _ 3-pole technology: 2-pole LED module changeover and delayed power switching for the LED driver _ Automatic shutdown of output if LED load is out of range _ Constant power output _ Maximum light output for all LED modules _ Electronic charge system _ Deep discharge protection _ Short-circuit-proof battery connection _ Polarity reversal protection for batteryBatteries
_ High-temperature cells _ NiCd or NiMH batteries _ D, Cs or LA cells _ 4 year design life _ 1 year guarantee _ For battery compatibility refer to data sheet
Driver LCBI 15W 350/500/700mA BASIC phase-cut lp 15W 89800257 TRIDONIC
advanced series
Product description
- Dimmable via leading edge and trailing edge phase dimmers
- Output dimmed analogue (current amplitude)
- Dimming range typ. 5 to 100 % (depending on dimmer)
- Type of protection IP20
- Push-in terminals
- Connecting cable, wire cross-section 0.5 – 1.5 mm²
- SELV
- 350, 500 or 700 mA output current
- Output power 15/16 W
- Nominal lifetime of 50,000 h (at max ta 50 °C with a failure rate ≤ 0.2 % per 1,000 h)
- 5 years guarantee
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS