OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Driver LCA 100W 250–700mA one4all lp PRE 100W 28000661 TRIDONIC
premium series non-SELV
Product description- NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
- Dimmable built-in constant current LED driver
- Dimming range 1 to 100 %
- For luminaires of protection class I and protection class II
- Output current adjustable between 250 – 700 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI
- Max. output power 100 W
- Up to 93 % efficiency
- Power input on stand-by < 0.15 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Constant Voltage DALI Dimmer SR-2304B
* Pricing Available upon Request *
Product Description
The DALI Dimmer SR-2304B is a constant voltage dimming controller with 4 channel, 5A per channel output, which complies to standard DALI protocol with 1 DALI address to control 4 channels synchronously. The DALI address can be manually assigned and shown on the numeric digital display or automatically assigned by master controllers. 1-4 DALI addresses can be configurable for 4 channels to work synchronously or separately. 0.1%-100% smooth dimming can be achieved by the DALI dimmer via logarithmic dimming, which is perfect for human's vision. The DALI dimmer can not only be compatible with DALI masters, but also push switch to get dim and switch functions under the situation without DALI signal.
Driver LC 10W 150–400mA bDW SC PRE2 | 28002411
Product description
• NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance) • Dimmable built-in constant current LED driver • Can be either used build-in or independent with clip-on strain-relief (see accessory) • Forms automatically a wireless communication network with up to 250 nodes • Dimming range 1 – 100 % • For luminaires of protection class I and protection class II • Adjustable output current between 150 and 400 mA via ready2mains™ Programmer or I-SELECT 2 plugs • Max. output power 10 W • Up to 82 % efficiency • Power input on stand-by < 0.35 W • Nominal lifetime up to 100,000 h • 5 years guarantee (conditions at www.tridonic.com)Housing properties
• Casing: polycarbonate, white • Type of protection IP20Interfaces
• basicDIM Wireless • ready2mains™ (configuration via mains) • Terminal blocks: 45° push terminalsFunctions
• Adjustable output current in 1-mA-steps (ready2mains™, I-SELECT 2) • Constant light output function (CLO) • Power-up fading at AC • Switch off the Driver with fade2zero • Configurable via ready2mains™ • Service monitor to log certain events • Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) • Suitable for emergency escape lighting systems acc. to EN 50172
Driver LCBI 10W 180mA PHASE-CUT/1–10V SR 10W 87500273 TRIDONIC
advanced series
Product description
- Independent dimmable LED driver
- Constant current LED driver
- Dimmable via leading edge and trailing edge phase dimmers
- Dimmable via 1 ... 10 V
- Output dimmed analogue (current amplitude)
- Dimming range typ. 10 to 100 % (depending on dimmer)
- For luminaires of protection class I and protection class II
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Temperature protection as per EN 61347-2-13 C5e
- SELV
- Output current 180, 350 or 500 mA
- Output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
COB-Cree 1516
* Pricing Available upon Request *
Product Description
The XLamp® High-Current LED Array family
is optimized for best-in-class lumen output,
efficacy and reliability at high drive currents.
XLamp CMA LEDs share the same package
design and LES sizes as Cree LED’s
industry-leading CXA2 Standard Density
LEDs, enabling lighting manufacturers
to address a range of performance
requirements for applications such as
track, downlight and outdoor lighting using
a single easy‑to‑use platform. XLamp
High‑Current LED Arrays are available in
2-step, 3-step and 5-step EasyWhite® bins.
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS