BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
SR-2812Wi
AED0.00
* Pricing Available upon Request *
Product Description
4 zone wall mounted RGBW DMX512 master SR-2812 is a full touch controller designed in accordance with standard protocol DMX512(1990) and offers fast and accurate color tone adjustment and independent brightness dimming of each RGBW channel with unique design touch color wheel. Designed with touch color wheel, the DMX512 controller can adjust color tone and brightness for RGBW LEDs smoothly and accurately. The DMX512 master can control 4 zones with endless decoders in each zone. Independent smooth dimming of each RGBW channel enables the DMX master to achieve millions of colors. Italian/Australian and American size are optional besides standard 86*86mm size. The Model SR-2812Wi is designed with built-in WiFi, WiFi to DMX function, which enables the DMX master to be controlled by ipad, iphone or android phones.
Driver LC 13W 300mA fixC SR SNC 13W 87500571 TRIDONIC
AED0.00
essence series
Product description
- Independent LED driver with cable clamps
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Temperature protection as per EN 61347-2-13 C5e
- KC certificate for LC 15W 350mA fixC SR SNC
- Output current 300 or 350 mA
- Max. output power 13 or 15 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
COB-Cree 1816
AED0.00
* Pricing Available upon Request *
PRODUCT DESCRIPTION
The XLamp® CXA1816 LED array expands
Cree LEDâs family of highâflux, multiâdie
arrays in a smaller, easyâtoâuse platform.
With XLamp LED lightingâclass reliability,
the CXA1816âs small, uniform emitting
surface enables both directional and
nonâdirectional lighting applications
including lamp retrofit and luminaire
designs. Available in 2âstep, 3âstep and
4âstep color consistency, and featuring a
12-mm optical source, the CXA1816 brings
new levels of flux and efficacy to this form
factor
EM converterLED BASIC 203 NiCd/NiMH 50V | 89800559
AED0.00
Properties
_ Non maintained operation _ 1 or 3 h rated duration _ Operating time selectable with plug (duration link) _ Compatible with all dimmable and non-dimmable constant current LED driver (see data sheet, LED driver compatibility) _ 3-pole technology: 2-pole LED module changeover and delayed power switching for the LED driver _ Automatic shutdown of output if LED load is out of range _ Constant power output _ Maximum light output for all LED modules _ Electronic charge system _ Deep discharge protection _ Short-circuit-proof battery connection _ Polarity reversal protection for batteryBatteries
_ High-temperature cells _ NiCd or NiMH batteries _ D, Cs or LA cells _ 4 year design life _ 1 year guarantee _ For battery compatibility refer to data sheetDriver LC 75W 250–550mA flexC lp EXC 75W 28001808 TRIDONIC
AED0.00
excite series non-SELV
Product description
- Constant current LED driver for luminaire installation
- For luminaires of protection class I and protection class II
- Adjustable output current between 250 and 550 mA via ready2mains Programmer or I-SELECT 2 plugs
- Max. output power 75 W
- Up to 94 % efficiency
- Nominal lifetime up to 100,000 h
- 5 years guarantee
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS