BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Driver LC 10W 250mA fixC SR SNC2 10W 87500801 TRIDONIC
AED0.00
essence series
Product description
- Independent driver with strain-relief housing
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- Temperature protection as per EN 61347-2-13 C5e
- Output current 250, 350, 500 or 700 mA
- Max. output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
SR-SV9030A-MW-V 0-1 OV BLE Ceiling Mounted Microwave Sensor Controller
AED0.00
Product Description
Energy Saving
⢠Low/High-end trimming ⢠Daylight harvesting ⢠Occupancy/Vacancy detection ⢠Auto and advanced demand response programs ⢠Time-of-Day dimming schedule ⢠Energy monitoringCOMFORT & CONVENIENCE
⢠Advanced occupancy detections Light-level stability ⢠Configurable dim-and-linger occupancy ⢠Personalized setting profile ⢠Work with kinetic switch keypad and dimmer wall station Multi-scenes controlSENSING
⢠Testing height: 2.5m ⢠Detection area diameter: 12m@ 2.5m heightENVIRONMENT AND APPROBATION
⢠Operating temperature: -20° C to 55° C ⢠Agency approbations: CE/Ro HS/UL Com ming soon ... ⢠Warranty: 5 yearsDriver LCA 75W 900–1800mA one4all lp PRE 75W 28000655 TRIDONIC
AED0.00
premium series SELV
Product description
- NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
- Dimmable built-in constant current LED driver
- Dimming range 1 to 100 %
- For luminaires of protection class I and protection class II
- Output current adjustable between 900 â 1,800 mA
- Max. output power 75 W
- Up to 91 % efficiency
- Power input on stand-by < 0.15 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LC 15W 350mA fixC SR SNC2 15W 87500747 TRIDONIC
AED0.00
essence series
Product description
- Independent driver with strain-relief housing
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Temperature protection as per EN 61347-2-13 C5e
- Output current 300 or 350 mA
- Max. output power 15 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LCA 17W 250–700mA one4all SC PRE 17W 28000674 TRIDONIC
AED0.00
premium series
Product description
- NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
- Dimmable built-in constant current LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Dimming range 1 to 100 %
- For luminaires of protection class I and protection class II
- Output current adjustable between 250 â 700 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI
- Max. output power 17 W
- Up to 86 % efficiency
- Power input on stand-by < 0.2 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS