OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
COB-Cree 1820
* Pricing Available upon Request *
PRODUCT DESCRIPTION
The XLamp® CXA1820 LED array expands
Cree LED’s family of high‑flux, multi‑die
arrays, offering high performance in an
easy‑to‑use platform. With XLamp LED
lighting‑class reliability, the CXA1820’s
uniform emitting surface enables both
directional and non-directional lighting
applications and luminaire designs.
Available in 2-step, 3‑step and 4-step color
consistency, and featuring a 12‑mm optical
source, the CXA1820 brings new levels of
flux and efficacy to this form factor
Driver LCO 14W 100–500mA 38V one4all NFC C EXC3 14W 87500707 TRIDONIC
excite NFC outdoor series Product description
- Dimmable built-in constant current LED driver
- Dimming range 5 – 100 % (min. 5 mA)
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current adjustable between 100 – 500 mA via NFC, DALI or ready2mains Programmer
- Max. output power 14 W
- Up to 87 % efficiency
- Lowest power input on stand-by < 0.16 W
- Nominal lifetime of 100,000 h and 8 years guarantee
EM converterLED BASIC NiCd/NiMH 50 V |89800558
Properties
_ Non maintained operation _ 1 or 3 h rated duration _ Operating time selectable with plug (duration link) _ Compatible with all dimmable and non-dimmable constant current LED driver (see data sheet, LED driver compatibility) _ 3-pole technology: 2-pole LED module changeover and delayed power switching for the LED driver _ Automatic shutdown of output if LED load is out of range _ Constant power output _ Maximum light output for all LED modules _ Electronic charge system _ Deep discharge protection _ Short-circuit-proof battery connection _ Polarity reversal protection for batteryBatteries
_ High-temperature cells _ NiCd or NiMH batteries _ D, Cs or LA cells _ 4 year design life _ 1 year guarantee _ For battery compatibility refer to data sheet
Engine SLA AC G2 50mm SNC | 28001937
Product description
_ Fits in most existing MR16 / GU10 halogen luminaires
_ 10 W LED Equivalent to 50 W MR16 halogen with higher lumen
output
_ Perfect solution for MR16 / GU10 replacement project
_ Module with integrated electronic, heatsink and optics
_ Compatible with leading and trailing edge phase cut dimmers
_ Dimming range 0.1 to 100 % (depends on dimmer)
_ Eye-catching lens optic with mirrors halogen facettes
_ Long lifetime: L70B50 >50,000 h at tp = 75 °C
_ 5 years guarantee
SR-2400RB-RGBW(DT8)
* Pricing Available upon Request *
Product Description
The SR-2400RB-RGB is a RGB DT8 DALI rotary master with DALI output for dimming and RGB color adjusting of DALI DT8 devices. It supports dimming commands and DT8 commands and can be compatible with universal DT8 devices. It is a DALI master control unit designed with a built-in DALI power supply with 100-240VAC wide input which can power DALI bus while connected to AC mains. While not connected to AC mains, the rotary dimmer can be powered by DALI bus. The DALI master controller is updated with a standard 4mm diameter rotary axis that is perfect to use in Europe. Each MCU can power up to 50 DALI ECGs with max. 100mA DALI output. Maximum 2 active DALI MCUs powered by AC mains and 2 passive MCUs powered by DALI bus can connect to DALI bus and control up to 100 DALI ECGs for multiple control points. Dimming solutions are easy and reliable, no DALI addressing required. The master controller controls all devices on the circuit through broadcast. Double clicking the knob will switch from dimming to RGB color adjusting. Compatible with common European size accessories, the DALI manual control unit is easy to install.
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS