OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
SR-SB9080A
* Pricing Available upon Request *
Product Description
Based on Bluetooth mesh, this RF+Bluetooth curtain motor controller supports various curtain types: roller blinds, shutter blinds, drapes, etc., and is controlled by smart app or directly by wireless RF remote. It can be locally controlled with external switches even if not paired to a smart phone, and can be controlled through both smart App and remote controls, without gateway required. By virtue of accurate control, this controller supports both ON/OFF and level control. Besides, this device can easily and quickly pair to the smart App by simply pushing the K2 button. With mesh network and much longer control distance, it can transmit received signal to neighbor devices, with maximum 30m transmission distance between every two neighbor devices. Encrypted two-way communication and quick status feedback enable safe & reliable data transmission.Moreover, this curtain motor controller is compatible with universal RF+Bluetooth remotes, and each controller can pair to max. 8 remotes. Cloud control is available for remote access. In addition, this control can be controlled by external on/off switches, and is easy to be Installed into a standard wall box thanks to its mini size. Its radio frequency is 2.4GHz, and its waterproof grade is IP20.
BA-TR-22185147
key Features
Mains voltage range 220 – 240 V AC  voltage range 198 – 264 V DC voltage range 176 – 280 V(Lamp start ≥ 198 V DC)  Mains frequency 0 / 50 / 60 Hz  Overvoltage protection 320 V AC, 1 h Defined warm start ≤ 1.5 s  Operating frequency ≥ 39.5 kHz  Type of protection : IP20
SR-2300TS-DIM-EU
* Pricing Available upon Request *
Product Description
The SR-2300TS-DIM is a touch control dimmer switch with DALI output which complies to standard DALI protocol to dim and switch 4 light zones. Each DALI bus can install multiple dimmer switches. The high strength tempered glass panel offers smooth dimming and switch functions without any flickering. The LED dimmer complies to standard DALI protocol and can be compatible with DALI products from other international corporations. The DALI master can control up to 4 zones with 3 scenes saved for each zone. Available in standard European size and US size as well, the dimmer switch can be installed easily. Compatible with most of our DALI slaves that available in constant voltage and constant current versions, the DALI touch dimmer switch can control different types of LED lighting.
This DALI controller is available with both 100-240VAC input and 12-24VDC input versions. AC input version is designed with built-in 100mA DALI power supply to power up to 50 DALI ECG and it can also be powered by DALI bus while not connected to AC mains. Max. 100 DALI ECG can be controlled by 4 AC input DALI touch panels via broadcast on a control circuit with 2 connected to AC mains and 2 powered by DALI bus.
Driver LCU 150W 12V indoor IP20 150W 24166332 TRIDONIC
excite series 12 V – not dimmable (IP20)
Product description
- Constant voltage LED driver
- Universal input voltage range
- Constant output voltage
- Nominal lifetime up to 50,000 h (at ta 40 °C with a failure rate ≤ 0.2 % per 1,000 h)
- 5 years guarantee
- Complies with CLASS C from minimum to maximum load range according to EN 61000-3-2
Module SLA DC G2 50mm SNC | 28001955
Product description
_ Fits in most existing MR16 / GU10 halogen luminaires
_ Replacement of 50 W MR16 halogen lamps or 20 W HID lamp
_ Module with integrated heatsink and optics
_ Free choice of variable dimming and non-dimming LED drivers
_ Pre-wired for quick and easy installation
_ Eye-catching lens optic with mirrors halogen facettes
_ Long lifetime: L70B50 >50,000 h
_ 5 years guarantee
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS