OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
SR-2108FA-4CH
* Pricing Available upon Request *
Product Description
SR-2108FA-4CH is an industrial level constant voltage DMX512 & RDM controller which features full support to the latest DMX512, DMX512(1990), DMX512-A and RDM V1.0 (E1.20 – 2006 ESTA Standard) protocols. The RDM controller is designed with 5 channels, 5A per channel constant voltage output and available in 12VDC, 24VDC and 36VDC.The DMX LED controller is designed with easy connection terminals without screws.
RDM bi-direction communication function enables the DMX512 master console to detect and display decoder information and set DMX address. A variety of features can be set via the visible numeric digital display and the buttons such as DMX address, output channel quantity, PWM output resolution (8 bit or 16 bit), PWM output frequency, GAMMA ray dimming curve value and DMX decoding mode.
There are total 4 PWM output channels with common anode and DMX channel quantity can be settable from 1CH to 4CH. DMX address can be set and displayed via the numeric digital display. High frequency 16bit and low frequency 8bit PWM output resolution are available and switchable, and default setting is 16bit. 10 levels of PWM output frequency are optional from 500Hz-30kHz, default setting is 1kHz. Gamma ray dimming curve value is adjustable from 0.1-9.9, and logarithmic dimming and linear dimming are optional. DMX Decoding modes are optional and enable to adjust brightness of each output channel, master brightness of all output channels and strobe effects, and default mode is dp1.1.
Driver LCA 21W 300-500mA flexC PH-C SR ADV 21W 87500603 TRIDONIC
advanced series
Product description
- Dimmable constant current LED driver (SELV)
- Independent LED driver with cable clamps
- Dimmable via leading edge and trailing edge phase dimmers
- Dimming range 5 to 100 % (depending on dimmer)
- For luminaires of protection class I and protection class II
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Temperature protection as per EN 61347-2-13 C5e
- Selectable output current between 300, 450 and 500 mA
- Max. output power 21 W
- Up to 82 % efficiency
- Nominal lifetime up to 50,000 h
- 5 years guarantee
4 Channels DALI DT8 Dimmer with Built-in Master Function SR-2309FA-OLED
* Pricing Available upon Request *
Product Description
Product Description
SR-2309FA-OLED is the world first DALI certified DT8 dimmer with built-in DALI master function and OLED display for visible manual configuration. The LED dimmer is designed with 4 PWM outputs which are controlled via a single DALI address. DT8 color types all in one: Tc, RGBWA, XY+ Tc, RGB+ Tc can be set. It enables to address (00-63) and group (0-15) the dimmer. It enables to predefine and recall total 16 DALI scenes to the dimmer. PWM output frequency can be set from 250Hz-30KHz which ensures ultra smooth color control.
It enables to set a Min. level for dimming between this level to Max. level. Output level and DT8 color can be set manually. DALI default parameters such as fade time, fade rate, power on level, system failure level can be set .
Driver LCI 35 W 350/500/700/1050 mA TEC C | 87500192
Product description
• Fixed output built-in LED Driver • Constant current LED Driver • Output current 350, 500, 700 or 1,050 mA • Max. output power 35 W • Nominal life-time up to 50,000 h • For luminaires of protection class I and protection class II • Temperature protection as per EN 61347-2-13 C5e • 5-year guarantee (conditions at www.tridonic.com)Properties
• Casing: polycarbonat, white • Type of protection IP20Functions
• Overtemperature protection • Overload protection • Short-circuit protection • No-load protection
COB-Cree 1820
* Pricing Available upon Request *
PRODUCT DESCRIPTION
The XLamp® CXA1820 LED array expands
Cree LED’s family of high‑flux, multi‑die
arrays, offering high performance in an
easy‑to‑use platform. With XLamp LED
lighting‑class reliability, the CXA1820’s
uniform emitting surface enables both
directional and non-directional lighting
applications and luminaire designs.
Available in 2-step, 3‑step and 4-step color
consistency, and featuring a 12‑mm optical
source, the CXA1820 brings new levels of
flux and efficacy to this form factor
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS