OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Universal series DALI dimmer SR-2302B(WP)
* Pricing Available upon Request *
Product Description
The DALI Dimmer SR-2302B is a constant voltage dimming controller with 4 channel, 5A per channel output, which complies to standard DALI protocol with 1 DALI address to control 4 channels synchronously. The DALI address can be manually assigned and shown on the numeric digital display or automatically assigned by master controllers. 1 DALI address is available for 4 channels to work synchronously. 0%-100% smooth dimming can be achieved by the DALI dimmer via logarithmic dimming, which is perfect for human's vision.
Driver LC 10W 150–400mA flexC SC EXC 10W 28000704 TRIDONIC
excite series
Product description
- Constant current LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Adjustable output current between 150 and 400 mA via ready2mains Programmer or I-SELECT 2 plugs
- Max. output power 10 W
- Up to 83 % efficiency
- Nominal lifetime up to 100,000 h
- 5 years guarantee
SR-2108F8-4CH
Product Description
SR-2108FB-4CHis a 4 channels constant voltage OMX & ROM controller that supports real16 bit PWM resolute on. The DMX controller s designed with both master mode and slave mode which are easy to switch. It features full support to the all test DMX512,DMX512(1990),DMX512 -A and RDMV1.0 (E1.20 - 2006 ESTA Standard) protocols. The OMX decoder is designed with 4 channels, Sà per channel constant voltage output and available in 12VDC, 24VDC and 36VDC.The OMX controller is designed with easy wiring terminals that do not require screws. ROM bi-direction communication function enables the DMXS12 master console to detect and display decoder  inform at on and set OMX address. While under decoder mode ,a variety of features can be set via the visible numeric digital display and the buttons such as DMX address, output channel quantity, PWM output reso ut on (8 bit or 16 bit), PWM output frequency, GAMMA ray dimming curve value and OMX decoding mode. There are total4 PWM output channel s with common anode and OMX channel quant ty can be settable from 1CH to 4CH.OMX address can be set and displayed via the numeric digital display. High frequency 16bit and ow frequency 8bit PWM output resolution are available and switchable, and default setting is 16bit.10 levels of PWM output  frequency are optional from 500Hz-30kHz,defau t setting is 1kHz.Gamma ray dimming curve value is adjustable from 0.1-9.9,and logarithmic dimming and linear dimming are optional. OMX Decoding modes are optional and enable to  adjust brightness of each output channel master brightness of all output channels and strobe effects, and defau t modeis dp1.1. While under master mode, the DMXS12 controller can control RGB LEO lighting with 8levels brightness adjustment, 32 built-in programs for RGB static colors or dynamic co or changing patterns, and 16 levels changing speed adjustable .Also it can control color temperature of CW and WW dual color LED lighting.
SR-2300TR-G4-RGBW-EU(DT8)
* Pricing Available upon Request *
Product Description
The DALI master SR-2300TR-RGBW is a touch RGBW DALI controller which adopts high strength and ultra sensitive tempered glass panel with touch color wheel design to offer accurate and fast color tone adjustment and brightness adjustment functions to RGB+W LED lighting, the RGBW controller complies to IEC 62386-102, IEC 62386-207, IEC 62386-209 and can be compatible with DALI products from other international corporations. The DALI master can control up to 1 light zone with 4 scenes (EU version) or 3 scenes (US version). For DT6 version, each light zone can control 4 DALI addresses, and enables to set starting DALI address. For DT8 version, each light zone can control 1 DALI group, enables to set start DALI group number and DALI scene number. 10 built-in color sequences are available. The RGBW DALI master controller can detect DALI bus and multiple controllers can be installed in one channel DALI bus. Compatible with most of our DALI slave controllers that are available in both constant voltage and constant current versions, the RGBW touch controller can control different types of LED lighting. 10 built-in color sequences are available.
This DALI controller is available with both 100-240VAC input and 12-24VDC input versions. AC input version is designed with built-in 100mA DALI power supply to power up to 50 DALI ECG and it can also be powered by DALI bus while not connected to AC mains. Max. 100 DALI ECG can be controlled by 4 AC input DALI touch panels via broadcast on a control circuit with 2 connected to AC mains and 2 powered by DALI bus.
Driver LC 15W 300mA fixC SR SNC2 15W 87500746 TRIDONIC
essence series
Product description
- Independent driver with strain-relief housing
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Temperature protection as per EN 61347-2-13 C5e
- Output current 300 or 350 mA
- Max. output power 15 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS