OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Multi-addresses PRO DALI DT8 LED Controller SR-2309Pro-5C
* Pricing Available upon Request *
Product Description
SR-2309PRO-5C is a 7 in 1 professional multi-addresses enabled DALI DT8 control gear which is compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, IEC 62386-209:2011. It is DALI DT8 device with built-in DALI-2 interface. Multi addresses are enabled in this control gear, which means it integrates multi DALI DT8 devices in on control gear. It can be set as single address type or multi-addresses type. The combination of device types can be configured with the buttons and display, and total 7 combinations available: Tc, RGBWAF, XY, 2*Tc, XY+Tc, RGB+Tc, XY+W (DT6).
This control gear is designed with 5 channels PWM output, which enables to control tunable white LEDs, RGB LEDs, RGBW LEDs, RGB+tunable white LEDs depending on the device type configured. One control gear is enough to meet all requirements. This control gear is innovative to be compatible with universal DALI systems, whatever DALI DT8 device types a DALI system support, this control gear supported all DALI DT8 device types.
DALI address can be freely set using the buttons and digital display even without a DALI master controller.
This control gear also supports push dim to control not only brightness but also color temperature and RGB colors even if there is no DALI signal.
4 Channels DALI Phase Dimmer 70040042 SR-2303AC-4CH-DIN
* Pricing Available upon Request *
Product Description
The SR-2303AC-4CH-DIN is a DALI + Push phase cut dimmer designed with 100-240VAC input and 100-240VAC output and safe and reliable full isolation design to control phase cut dimmable LED lamps, traditional incandescent and halogen lights. It is also compatible with universal phase cut dimmable LED drivers. The DALI phase dimmer is designed with DALI control interface with digital numeric digital display to set and show DALI address freely. The AC dimmer adopts trailing edge dimming (reverse-phase control) and comes with 4 channels and maximum 1.8A per channel output. 1/2/3/4 DALI addresses can be settable to control 4 output channels synchronously or separately. The innovative minimum brightness setting function enables users to set a minimum brightness and dim from this minimum brightness to 100% brightness. Also it is easy to delete the minimum brightness. The DALI phase dimmer can be compatible with universal DALI systems.
It is designed with DIN rail installation style, and can be easily mounted on standard 35mm DIN rail.
Driver LC 165W 400-700mA flexC lp ADV 165W 28002470 TRIDONIC
advanced series non-SELV
Product description
-
- LED Constant current LED driver for luminaire installation
- Output current adjustable between 400 – 700 mA
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Max. output power 165 W
- Up to 94 % efficiency
- Nominal lifetime up to 100,000 h
- 5 years guarante
Driver LC 5W 120mA fixC pc SR SNC2 5W 28003341 TRIDONIC
essence series
Product description
- Dimmable constant current LED driver (SELV)
- Independent driver with strain-relief housing
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- Dimmable via leading edge and trailing edge phase dimmers
- Dimming range 5 to 100 % (depending on dimmer)
- For luminaires with F or M and MM as per EN 60598, VDE 0710 and VDE 0711
- Max. output power 5 W
- Output current 120 mA
- Nominal lifetime up to 50,000 h
- 5 years guarantee
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS