OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Driver LC 25W 100–500mA flexC lp EXC 25W 28000679 TRIDONIC
excite series SELV
Product description
- Constant current LED driver for luminaire installation
- For luminaires of protection class I and protection class II
- Adjustable output current between 100 and 500 mA via ready2mains Programmer or I-SELECT 2 plugs
- Max. output power 25 W
- Up to 87 % efficiency
- Nominal lifetime up to 100,000 h
- 5 years guarantee
SR-SB9040A-S
Key Features
- RF+Bluetooth micro smart dimmer
- Can operate under two-... ire connection with no neutral lead or three-wire connection with neutral lead
- Both leading edge version and trailing edge version are available for choosing. factory default is trailing edge
- Enables to control ONIOFF and light intensity of connected load
- Controlled through both smart App and remote controls, no gateway required
- Easy & quick pairing to the smart App by simply pushing the reset button, supports voice control through Alexa
- Mesh network, much longer control distance: transmits received signal to neighbor devices
- Up to 30m transmission distance between every two neighbor devices
- Encrypted two-way communication, quick status feedback. safe & reliable data transmission
- Compatible with universal REA-Bluetooth remotes: each LED controller can pair to max. 6 remotes
- Cloud control is available for remote access. works with Amazon Alexa and Google Home
- Implemented algorithm of smart light source detection
- Auto-adjustment of the appropriate control mode to connected load
- Soft start function
- Memory of the last lighting level settings
- Works with various types of switches — momentary. toggle. three-way. etc.
- To be installed in wall switch boxes of dimensions allowing for installation
- The Bypass is an extension unit.
Driver LCBI 15W 350/500/700mA BASIC phase-cut lp 15W 89800256 TRIDONIC
advanced series
Product description
- Dimmable via leading edge and trailing edge phase dimmers
- Output dimmed analogue (current amplitude)
- Dimming range typ. 5 to 100 % (depending on dimmer)
- Type of protection IP20
- Push-in terminals
- Connecting cable, wire cross-section 0.5 – 1.5 mm²
- SELV
- 350, 500 or 700 mA output current
- Output power 15/16 W
- Nominal lifetime of 50,000 h (at max ta 50 °C with a failure rate ≤ 0.2 % per 1,000 h)
- 5 years guarantee
SR-SBP2801K4-BLE
* Pricing Available upon Request *
Product Description
SR-SBP2801-BLE enables the realization of energy harvesting wireless switches for lighting, build- ing or industrial automation control systems using Bluetooth® low energy technology.
SR-SBP2801-BLE is mechanically compatible with existing switch elements enabling quick integration into a wide range of designs. Key applications are wall-mounted or portable switches either with up to two rockers or up to four push buttons.
SR-SBP2801-BLE pushbutton transmitters are self-powered (no batteries) and fully maintenance- free. They can therefore be used in all environments including locations that are difficult to reach or within hermetically sealed housings. The required energy is generated by an electro-dynamic energy transducer actuated by an energy bow located on the left and right of the module. This energy bow which can be pushed from outside the module by an appro- priate pushbutton or switch rocker.
When the energy bow is pushed down or released, electrical energy is created and a radio telegram according to the Bluetooth® low energy standard is transmitted. This radio telegram transmits the status of all four contact nipples when the energy bow was pushed down or released. SR-SBP2801-BLE radio telegrams are protected with AES-128 security based on a device-unique private key.
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS