OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
SR-2830CDMX
* Pricing Available upon Request *
Product Description
RGB & dual color DMX512 master SR-2830CDMX is a full touch controller that complies with standard protocol DMX512(1990) and offers fast and accurate color tone adjustment and independent brightness dimming of RGB, warm white and cold white. Designed with touch color line in the middle, the DMX512 controller can adjust color tone, color temperature and brightness for RGB, WW and CW LED lights. Each controller can control 4 different zones separately or synchronously with endless decoders in each zone and 2 kelvin or scenes can be saved for each zone. Independent smooth dimming of R, G and B enables the DMX master to achieve millions of colors. 256 level brightness adjustment of each white enables the controller to achieve millions of color temperature. Humanized memory function enables the controller to remember the last scene after turn off or cut off. Humanization backlighting design enables the RGB controller to be found even in the dark.
Driver LC 10W 500mA fixC SC SNC2 10W 87500797 TRIDONIC
essence series Product description
- Fixed output LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Independent LED driver with cable clamps
- Constant current LED driver
- For luminaires of protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current 250, 350, 500 or 700 mA
- Max. output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LC 10W 150–400mA bDW SC PRE2 | 28002411
Product description
• NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance) • Dimmable built-in constant current LED driver • Can be either used build-in or independent with clip-on strain-relief (see accessory) • Forms automatically a wireless communication network with up to 250 nodes • Dimming range 1 – 100 % • For luminaires of protection class I and protection class II • Adjustable output current between 150 and 400 mA via ready2mains™ Programmer or I-SELECT 2 plugs • Max. output power 10 W • Up to 82 % efficiency • Power input on stand-by < 0.35 W • Nominal lifetime up to 100,000 h • 5 years guarantee (conditions at www.tridonic.com)Housing properties
• Casing: polycarbonate, white • Type of protection IP20Interfaces
• basicDIM Wireless • ready2mains™ (configuration via mains) • Terminal blocks: 45° push terminalsFunctions
• Adjustable output current in 1-mA-steps (ready2mains™, I-SELECT 2) • Constant light output function (CLO) • Power-up fading at AC • Switch off the Driver with fade2zero • Configurable via ready2mains™ • Service monitor to log certain events • Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) • Suitable for emergency escape lighting systems acc. to EN 50172
EM converterLED BASIC 204 NiCd/NiMH 50V | 89800560
Properties
_ Non maintained operation _ 1 or 3 h rated duration _ Operating time selectable with plug (duration link) _ Compatible with all dimmable and non-dimmable constant current LED driver (see data sheet, LED driver compatibility) _ 3-pole technology: 2-pole LED module changeover and delayed power switching for the LED driver _ Automatic shutdown of output if LED load is out of range _ Constant power output _ Maximum light output for all LED modules _ Electronic charge system _ Deep discharge protection _ Short-circuit-proof battery connection _ Polarity reversal protection for batteryBatteries
_ High-temperature cells _ NiCd or NiMH batteries _ D, Cs or LA cells _ 4 year design life _ 1 year guarantee _ For battery compatibility refer to data sheet
Driver LC 10W 700mA fixC SC SNC2 10W 87500798 TRIDONIC
essence series Product description
- Fixed output LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Independent LED driver with cable clamps
- Constant current LED driver
- For luminaires of protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current 250, 350, 500 or 700 mA
- Max. output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS