OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
DR-LD-100W-24D-IP20
Features
- Constant voltage output design.
- 200~240 AC input.
- Encapsulated with IP20 level.
- Withstand 300VAC surge input for 5 seconds.
- Protections: Short circuit / Overload / Over voltage.
- Cooling by free air convection.
- Phase, 0-10V, 1-10V dimming options.
- 100% full load burn-in test.
- High cost-performance, high reliability.
- Suitable for LED related fixture or appliance.
Driver LC 50W 900-1200mA flexC SC ADV 50W 28002479 TRIDONIC
advanced series
Product description
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Small design (115 x 43 x 30 mm)
- Constant current LED driver
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Adjustable output current between 900 and 1,200 mA, in 5 steps with ADV plug technology (pre-selected current 900 mA)
- Max. output power 51.6 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LC 75W 250–550mA flexC lp EXC 75W 28001808 TRIDONIC
excite series non-SELV
Product description
- Constant current LED driver for luminaire installation
- For luminaires of protection class I and protection class II
- Adjustable output current between 250 and 550 mA via ready2mains Programmer or I-SELECT 2 plugs
- Max. output power 75 W
- Up to 94 % efficiency
- Nominal lifetime up to 100,000 h
- 5 years guarantee
SR-SB9040A-S
Key Features
- RF+Bluetooth micro smart dimmer
- Can operate under two-... ire connection with no neutral lead or three-wire connection with neutral lead
- Both leading edge version and trailing edge version are available for choosing. factory default is trailing edge
- Enables to control ONIOFF and light intensity of connected load
- Controlled through both smart App and remote controls, no gateway required
- Easy & quick pairing to the smart App by simply pushing the reset button, supports voice control through Alexa
- Mesh network, much longer control distance: transmits received signal to neighbor devices
- Up to 30m transmission distance between every two neighbor devices
- Encrypted two-way communication, quick status feedback. safe & reliable data transmission
- Compatible with universal REA-Bluetooth remotes: each LED controller can pair to max. 6 remotes
- Cloud control is available for remote access. works with Amazon Alexa and Google Home
- Implemented algorithm of smart light source detection
- Auto-adjustment of the appropriate control mode to connected load
- Soft start function
- Memory of the last lighting level settings
- Works with various types of switches — momentary. toggle. three-way. etc.
- To be installed in wall switch boxes of dimensions allowing for installation
- The Bypass is an extension unit.
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS