BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
RGBW Constant Current 700mA DT8 DALI Dimmer SR-2309FA7-RGBW
AED0.00
* Pricing Available upon Request *
Product Description
SR-2309FA7-RGBW is a 4 channel constant current 700mA output RGBW DT8 DALI dimmer that complies to the latest IEC 62386-209:2011 standard and supports DT8 device commands. Color control is as defined in the DALI specification for device type 8, color type RGBW or XY coordinates can be preset by factory setting. All output channels of this device is controlled via a single DALI address and it is compatible with universal DALI master controllers that supports DT8 commands. DT8 commands enable easy RGB color adjusting. DALI address can be manually assigned and displayed via digital display. It is configurable via DALI software tool and DALI USB interface.
DR-LD-150W-24D-IP67-PHD
AED0.00
Features
- Constant voltage output design.
- 200~240 AC input.
- Encapsulated with IP65 level.
- Withstand 300VAC surge input for 5 seconds.
- Protections: Short circuit / Overload / Over voltage.
- Cooling by free air convection.
- Phase, 0-10V, 1-10V dimming options.
- 100% full load burn-in test.
- High cost-performance, high reliability.
- Suitable for LED related fixture or appliance.
SR-SV9030A-MW-V 0-1 OV BLE Ceiling Mounted Microwave Sensor Controller
AED0.00
Product Description
Energy Saving
⢠Low/High-end trimming ⢠Daylight harvesting ⢠Occupancy/Vacancy detection ⢠Auto and advanced demand response programs ⢠Time-of-Day dimming schedule ⢠Energy monitoringCOMFORT & CONVENIENCE
⢠Advanced occupancy detections Light-level stability ⢠Configurable dim-and-linger occupancy ⢠Personalized setting profile ⢠Work with kinetic switch keypad and dimmer wall station Multi-scenes controlSENSING
⢠Testing height: 2.5m ⢠Detection area diameter: 12m@ 2.5m heightENVIRONMENT AND APPROBATION
⢠Operating temperature: -20° C to 55° C ⢠Agency approbations: CE/Ro HS/UL Com ming soon ... ⢠Warranty: 5 yearsSR-2422NK8-DA2
* Pricing Available upon Request *
Product Description
The SR-2422NK8-RGBW-G1-S2 is a DALI RGB+W DALI DT8 group&scene controller that controls 4 channels output via a single DALI address. The panel controls 1 group address and 2 scene addresses. The group of devices on DALI circuit and scenes to be controlled can be assigned manually by 2 rotary switches on the back. All DALI devices on the circuit can be controlled by the panel through broadcast. The DALI panel enables dimming commands, scene commands and DT8 commands to be sent to the selected group. DT8 commands enable easy RGB color adjusting for the RGBW LED lights. 2 predefined or saved scenes can be assigned and recalled to the selected group. It enables to save scenes which will cover the predefined ones. It is compatible with universal DALI masters that support DT8 commands and controls DT8 devices. It is easy to use and no configuration by computer required. Compatible with existing standard size EU wall box, the DALI push button controller can be wall mounted easily.
Module SLA DC G2 50mm SNC | 28002836
AED0.00
Product description
_ Fits in most existing MR16 / GU10 halogen luminaires
_ Replacement of 50 W MR16 halogen lamps or 20 W HID lamp
_ Module with integrated heatsink and optics
_ Free choice of variable dimming and non-dimming LED drivers
_ Pre-wired for quick and easy installation
_ Eye-catching lens optic with mirrors halogen facettes
_ Long lifetime: L70B50 >50,000 h
_ 5 years guarantee
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS