BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Dual Color DT8 DALI Dimmer SR-2309FA-CCT
AED0.00
* Pricing Available upon Request *
Product Description
SR-2309FA-CCT is a 4 channel constant voltage dual color DT8 DALI dimmer that complies to the latest IEC 62386-209:2011 standard and supports DT8 device commands. This device is controlled via a single DALI address and compatible with universal DALI master controllers that supports DT8 commands. DT8 commands enable easy color temperature adjusting between warm white and cool white. DALI address can be manually assigned and displayed via digital display. It is configurable via DALI software tool and DALI USB interface.
Driver LC 25W 100–500mA flexC lp EXC 25W 28000679 TRIDONIC
AED0.00
excite series SELV
Product description
- Constant current LED driver for luminaire installation
- For luminaires of protection class I and protection class II
- Adjustable output current between 100 and 500 mA via ready2mains Programmer or I-SELECT 2 plugs
- Max. output power 25 W
- Up to 87 % efficiency
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LC 13W 300mA fixC SR SNC 13W 87500571 TRIDONIC
AED0.00
essence series
Product description
- Independent LED driver with cable clamps
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Temperature protection as per EN 61347-2-13 C5e
- KC certificate for LC 15W 350mA fixC SR SNC
- Output current 300 or 350 mA
- Max. output power 13 or 15 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LCBI 15W 350/500/700mA BASIC phase-cut lp 15W 89800257 TRIDONIC
AED0.00
advanced series
Product description
- Dimmable via leading edge and trailing edge phase dimmers
- Output dimmed analogue (current amplitude)
- Dimming range typ. 5 to 100 % (depending on dimmer)
- Type of protection IP20
- Push-in terminals
- Connecting cable, wire cross-section 0.5 â 1.5 mm²
- SELV
- 350, 500 or 700 mA output current
- Output power 15/16 W
- Nominal lifetime of 50,000 h (at max ta 50 °C with a failure rate ⤠0.2 % per 1,000 h)
- 5 years guarantee
Driver LCA 100W 1100–2100mA one4all SR PRE 100W 28001571 TRIDONIC
AED0.00
premium series
Product description
- NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
- Independent dimmable constant current LED driver with strain-relief
- Dimmable via DALI / DALI-2
- Dimming range 1 â 100 % (whole operating window)
- Adjustable output current between 1,100 and 2,100 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI
- Max. output power 100 W
- Up to 92 % efficiency
- Power input on stand-by < 0.2 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS