BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Driver LC 165W 400-700mA flexC lp ADV 165W 28002470 TRIDONIC
AED0.00
advanced series non-SELV
Product description
-
- LED Constant current LED driver for luminaire installation
- Output current adjustable between 400 â 700 mA
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Max. output power 165 W
- Up to 94 % efficiency
- Nominal lifetime up to 100,000 h
- 5 years guarante
Driver LC 60W 1000-1400mA flexC SC ADV 60W 28002480 TRIDONIC
AED0.00
advanced series
Product description
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Small design (130 x 43 x 30 mm)
- Constant current LED driver
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Adjustable output current between 1,000 and 1,400 mA, in 5 steps with ADV plug technology (pre-selected current 1,000 mA)
- Max. output power 61.6 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LC 10W 250mA fixC C SNC 10W 87500628 TRIDONIC
AED0.00
Eessence series
Product description
- Fixed output built-in LED driver
- Constant current LED driver
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current 250 mA
- Max. output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LC 25W 100–500mA flexC lp EXC 25W 28000679 TRIDONIC
AED0.00
excite series SELV
Product description
- Constant current LED driver for luminaire installation
- For luminaires of protection class I and protection class II
- Adjustable output current between 100 and 500 mA via ready2mains Programmer or I-SELECT 2 plugs
- Max. output power 25 W
- Up to 87 % efficiency
- Nominal lifetime up to 100,000 h
- 5 years guarantee
10W SLA AC pc G2 50mm 700lm 3000K 24D SNC 28001936 Tridonic
AED0.00
Product description
_ Fits in most existing MR16 / GU10 halogen luminaires
_ 10 W LED Equivalent to 50 W MR16 halogen with higher lumen output
_ Perfect solution for MR16 / GU10 replacement project
_ Module with integrated electronic, heatsink and optics
_ Compatible with leading and trailing edge phase cut dimmers
_ Dimming range 0.1 to 100 % (depends on dimmer)
_ Eye-catching lens optic with mirrors halogen facettes
_ Long lifetime: L70B50 >50,000 h at tp = 75 °C
_ 5 years guarantee
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS