BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Driver LC 45W 1050mA fixC SC SNC2 45W 87500764 TRIDONIC
AED0.00
essence series
Product description
- Fixed output LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Independent LED driver with cable clamps
- Constant current LED driver
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current 1,050 mA
- Max. output power 45 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LCA 45W 500–1400mA one4all C PRE 45W 28000666 TRIDONIC
AED0.00
premium series
Product description
- NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
- Dimmable built-in constant current LED driver
- Dimming range 1 to 100 %
- For luminaires of protection class I and protection class II
- Output current adjustable between 500 â 1,400 mA
- Max. output power 45 W
- Up to 90 % efficiency
- Power input on stand-by < 0.15 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Constant Voltage 1 Channel DALI Dimmable SR-2303S (Push Dim)
AED0.00
* Pricing Available upon Request *
Product Description
This DALI & PUSH dimmer is a DALI-2, CE and FC certified device, coupled with 12-36VDC power input. This device is in compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, and can match all DALI systems in the market, so that you can rest assured to use it. With one DALI address input and one channel PWM output, this dimmer has both DALI dimmer and PUSH dimmer functions while connected with DALI master controllers and AC PUSH switches respectively.
SR-2701S-N
AED0.00
* Pricing Available upon Request *Â
Product Description
The SR-2701S-N is a DALI relay module plus DALI to 0/1-10V converter which is capable of switching both AC and DC Loads and controlling 0/1-10y climbable Loads_ The max_ switching voltage for AC loads is 250V, and the max. switching voltage for DC Loads is 30V The DALL RM enables to integrate existing loads which do not have DALJ input into DALI circuit and switch on/off the Loads The DALI to 13/1-10y converter enables to integrate Q/1-10VdimmabLe Loads into DALI circuit and control the loads via DAL'. The max Load capacity for convent on2L incandescent and halogen Light sources is 10.0°W @ 2301, and max. Load capacity for LED Light sources is 300W @ 2301_ It is easy to be installed into existing standard wall boxes or mounted on 35rnm DIN rail with an extra mounting bracket.Constant Voltage DALI Dimmer SR-2304B(WP)
AED0.00
* Pricing Available upon Request *
Product Description
The DALI Dimmer SR-2304B is a constant voltage dimming controller with 4 channel, 5A per channel output, which complies to standard DALI protocol with 1 DALI address to control 4 channels synchronously. The DALI address can be manually assigned and shown on the numeric digital display or automatically assigned by master controllers. 1-4 DALI addresses can be configurable for 4 channels to work synchronously or separately. 0.1%-100% smooth dimming can be achieved by the DALI dimmer via logarithmic dimming, which is perfect for human's vision. The DALI dimmer can not only be compatible with DALI masters, but also push switch to get dim and switch functions under the situation without DALI signal.
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS