BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
DOW-SKD-LD-SD-3343
AED0.00
ABT-1X3W
AED0.00
key Features
Type: Dimmable Led driver Model: 3W Dimmable :YES Certification: CCC,CE Brand Name: BSOD Color: White and blue Material: Plastic Input Voltage:AC110V 50/60HZ Output Voltage: DC 10V Current : 280-300mA Dimensions:55mmx28mmx19mm Range of dimmable :0-100% Work Temperature: -40â - +65â Power:3w Waterproof: NoSR-2202N-1-10V-A
* Pricing Available upon Request *
Product Description
SR-2202N-1-10V is a single color LED controller with 1-10v signal output and designed with sleek compact appearance. The rotary dimmer switch adopts popular and mature 1-10V signal control which offers both switch and smooth brightness dimming functions by clicking and rotating the knob. Smooth dimming range from 0.1%-100% without any flickering can be very comfortable for human eyes. Compatible with SR-2001 series 0/1-10V signal receivers that are available in both constant voltage and constant current version, the rotary dimmer switch can control different types of LED lightings. The rotary switch is powered directly by 100-240VAC mains and no extra power supply required. The controller can be compatible with existing standard size frame from Jung, Berker, Gira, Merten etc. It is easy to install the wall switch into existing standard size wall boxes.
Driver LC 21W 500mA fixC pc SR SNC2 21W 28003346 TRIDONIC
AED0.00
essence series
Product description
- Dimmable constant current LED driver (SELV)
- Independent driver with strain-relief housing
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- Dimmable via leading edge and trailing edge phase dimmers
- Dimming range 5 to 100 % (depending on dimmer)
- For luminaires with F or M and MM as per EN 60598, VDE 0710 and VDE 0711
- Max. output power 21 W
- Output current 500 mA
- Nominal lifetime up to 50,000 h
- 5 years guarantee
SR-SBP2801-BLE
* Pricing Available upon Request *
Product Description
SR-SBP2801-BLE enables the realization of energy harvesting wireless switches for lighting, build- ing or industrial automation control systems using Bluetooth® low energy technology.
SR-SBP2801-BLE is mechanically compatible with existing switch elements enabling quick integration into a wide range of designs. Key applications are wall-mounted or portable switches either with up to two rockers or up to four push buttons.
SR-SBP2801-BLE pushbutton transmitters are self-powered (no batteries) and fully maintenance- free. They can therefore be used in all environments including locations that are difficult to reach or within hermetically sealed housings. The required energy is generated by an electro-dynamic energy transducer actuated by an energy bow located on the left and right of the module. This energy bow which can be pushed from outside the module by an appro- priate pushbutton or switch rocker.
When the energy bow is pushed down or released, electrical energy is created and a radio telegram according to the Bluetooth® low energy standard is transmitted. This radio telegram transmits the status of all four contact nipples when the energy bow was pushed down or released. SR-SBP2801-BLE radio telegrams are protected with AES-128 security based on a device-unique private key.
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS