BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Driver LC 7W 350mA fixC pc SR SNC2 7W 28003348 TRIDONIC
AED0.00
essence series
Product description
- Dimmable constant current LED driver (SELV)
- Independent driver with strain-relief housing
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- Dimmable via leading edge and trailing edge phase dimmers
- Dimming range 5 to 100 % (depending on dimmer)
- For luminaires with F or M and MM as per EN 60598, VDE 0710 and VDE 0711
- Max. output power 7 W
- Output current 350 mA
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Mini Size Constant Voltage DALI & PUSH Dimmer SR-2303 (Push Dim)
AED0.00
* Pricing Available upon Request *
Product Description
This DALI & PUSH dimmer is a DALI-2, CE and FC certified device, coupled with 12-24VDC power input. This device is in compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, and can match all DALI systems in the market, so that you can rest assured to use it. With one DALI address input and one channel output, this dimmer is mini in size, high in output current, and its current is 10A per channel. Moreover, its dim function can directly support AC high voltage input PUSH switch. This product has both DALI dimmer and PUSH dimmer functions while connected with DALI master controllers and AC PUSH switches respectively.
Driver LC 13W 300mA fixC SR SNC 13W 87500571 TRIDONIC
AED0.00
essence series
Product description
- Independent LED driver with cable clamps
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Temperature protection as per EN 61347-2-13 C5e
- KC certificate for LC 15W 350mA fixC SR SNC
- Output current 300 or 350 mA
- Max. output power 13 or 15 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
BA-TR-22185147
AED0.00
key Features
Mains voltage range 220 â 240 V AC  voltage range 198 â 264 V DC voltage range 176 â 280 V(Lamp start ⥠198 V DC)  Mains frequency 0 / 50 / 60 Hz  Overvoltage protection 320 V AC, 1 h Defined warm start ⤠1.5 s  Operating frequency ⥠39.5 kHz  Type of protection : IP20EM converterLED BASIC 203 NiCd/NiMH 50V | 89800559
AED0.00
Properties
_ Non maintained operation _ 1 or 3 h rated duration _ Operating time selectable with plug (duration link) _ Compatible with all dimmable and non-dimmable constant current LED driver (see data sheet, LED driver compatibility) _ 3-pole technology: 2-pole LED module changeover and delayed power switching for the LED driver _ Automatic shutdown of output if LED load is out of range _ Constant power output _ Maximum light output for all LED modules _ Electronic charge system _ Deep discharge protection _ Short-circuit-proof battery connection _ Polarity reversal protection for batteryBatteries
_ High-temperature cells _ NiCd or NiMH batteries _ D, Cs or LA cells _ 4 year design life _ 1 year guarantee _ For battery compatibility refer to data sheetLEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS