BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
SR-2303SAC-HP
AED0.00
Key FeaturesÂ
In compliance with IEC62386-101:2014,1EC 62386-102:2014,IEC 62386-207 Ed2.  DALI-2 interface, DALI DT6 device Match all DALI systems in the market AC phase cut dimmer with both DALE and push switch control interface  100-240VAC Wide Input and Output Voltage 1 DALI address to control 1 Channel Output, Up to 400W Input and Output with Screw Terminals, Safe and Reliable Trailing edge dimming, supports resistive Loads and capacitive toads Innovative minimum brightness setting function Single Wire Push Switch Input for Push Dim Function Great Compatibility with Universal 8V-230V-- Input Push Switches To dim and switch single color dimmable LED Lamps, traditional incandescent and halogen:-, light Mini Size, Easy to be installed into a standard size wall. boxDriver LC 15W 300/350mA fixC SC SNC2 15W 87500718 TRIDONIC
AED0.00
essence series
Product description
- Fixed output LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Independent LED driver with cable clamps
- Constant current LED driver
- For luminaires of protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current 300 or 350 mA
- Max. output power 15 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
SR-2300TS-DIM-EU Black
AED0.00
* Pricing Available upon Request *Â
Product Description
The SR-2300TS-DIM is a touch control dimmer switch with DALI output which complies to standard DALI protocol to dim and switch 4 light zones. Each DALI bus can install multiple dimmer switches. The high strength tempered glass panel offers smooth dimming and switch functions without any flickering. The LED dimmer complies to standard DALI protocol and can be compatible with DALI products from other international corporations. The DALI master can control up to 4 zones with 3 scenes saved for each zone. Available in standard European size and US size as well, the dimmer switch can be installed easily. Compatible with most of our DALI slaves that available in constant voltage and constant current versions, the DALI touch dimmer switch can control different types of LED lighting.
This DALI controller is available with both 100-240VAC input and 12-24VDC input versions. AC input version is designed with built-in 100mA DALI power supply to power up to 50 DALI ECG and it can also be powered by DALI bus while not connected to AC mains. Max. 100 DALI ECG can be controlled by 4 AC input DALI touch panels via broadcast on a control circuit with 2 connected to AC mains and 2 powered by DALI bus.
SR-2701S
AED0.00
* Pricing Available upon Request *
Product Description
The SR-2701S is a DALI relay module which is capable of switching both AC and DC loads. The max. switching voltage for AC loads is 250V, and the max. switching voltage for DC loads is 30V. The DALI RM enables to integrate existing loads which do not have DALI input into DALI circuit and switch on/off the loads.
The max. load capacity for conventional incandescent and halogen light sources is 1000W @ 230V, and max. load capacity for LED light sources is 300W @ 230V. It is easy to be installed into existing standard wall boxes or mounted on 35mm DIN rail with an extra mounting bracket.
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS