OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
COB-Cree 1516
* Pricing Available upon Request *
Product Description
The XLamp® High-Current LED Array family
is optimized for best-in-class lumen output,
efficacy and reliability at high drive currents.
XLamp CMA LEDs share the same package
design and LES sizes as Cree LED’s
industry-leading CXA2 Standard Density
LEDs, enabling lighting manufacturers
to address a range of performance
requirements for applications such as
track, downlight and outdoor lighting using
a single easy‑to‑use platform. XLamp
High‑Current LED Arrays are available in
2-step, 3-step and 5-step EasyWhite® bins.
100-240VAC Triac Bleeder TB01 | EUCHIPS SCR Dimming Compensator
key Features
Model: Triac Bleeder TB01 Input Voltage: 100– 240VAC Frequency: 50/60Hz Input Current: 37mA@115VAC /24mA@230VAC Power: 3W@115VAC/1.5W@230VAC Dimension：　73*36*29 mm（L*W*H） G.W.: 75g IP grade: IP20 Active compensation Wide input voltage of 100VAC ~ 240VAC Suitable for TRIAC circuit load compensation
96W LED DRIVER SRP-T24-6
Key Features
- Ultra slim design
- 1 channel 24VDCI48VDC constant voltage output
- Class II power supply, full isolated plastic case
- Built-in active PFC function
- PF > 0.9, Efficiency > 89%
- Compliant with Safety Extra Low Voltage standard
- Short circuit, over load. over temperature protection
- IP20 rating, suitable for indoor LED lighting applications
- 6 years warranty
Driver LC 17W 250–700mA bDW SC PRE2 | 28002412
Product description
- NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance)
- Dimmable built-in constant current LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Forms automatically a wireless communication network with up to 250 nodes
- Adjustable output current between 250 and 700 mA via ready2mains Programmer or I-SELECT 2 plugs
- Max. output power 17 W
- Up to 86 % efficiency
- Power input on stand-by < 0.35 W
- Dimming range 1 to 100 %
- For luminaires of protection class I and protection class II
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Housing properties
- Casing: polycarbonate, white
- Type of protection IP20
Interfaces
- basicDIM Wireless
- ready2mains (configuration via mains)
- Terminal blocks: 45° push terminals
Functions
- Adjustable output current in 1-mA-steps (ready2mains, I-SELECT 2)
- Constant light output function (CLO)
- Power-up fading at AC
- Switch off the driver with fade2zero
- Configurable via ready2mains
- Service monitor to log certain events
- Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification)
- Intelligent Voltage Guard (overvoltage and undervoltage monitoring)
- Suitable for emergency escape lighting systems acc. to EN 50172
Benefits
- Application-oriented operating window for maximum compatibility
- Best energy savings due to low stand-by losses and high efficiency
- Flexible configuration via basicDIM Wireless, ready2mains and I-SELECT 2
Typical applications
- For linear/area lighting in office applications
Driver LC 45W 1050mA fixC SR SNC2 45W 87500771 TRIDONIC
essence series
Product description
- Independent driver with strain-relief housing
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Temperature protection as per EN 61347-2-13 C5e
- Output current 1,050 mA
- Nominal lifetime up to 50,000 h
- 5 years guarantee
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS