BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Module SLA DC G2 50mm SNC | 28002836
AED0.00
Product description
_ Fits in most existing MR16 / GU10 halogen luminaires
_ Replacement of 50 W MR16 halogen lamps or 20 W HID lamp
_ Module with integrated heatsink and optics
_ Free choice of variable dimming and non-dimming LED drivers
_ Pre-wired for quick and easy installation
_ Eye-catching lens optic with mirrors halogen facettes
_ Long lifetime: L70B50 >50,000 h
_ 5 years guarantee
Driver LCBI 10W 180mA PHASE-CUT/1–10V lp 10W 87500282 TRIDONIC
AED0.00
advanced series
Product description
- Dimmable built-in constant current LED driver
- Constant current LED driver
- Dimmable via leading edge and trailing edge phase dimmers
- Dimmable via 1 ... 10 V
- Output dimmed analogue (current amplitude)
- Dimming range typ. 10 to 100 % (depending on dimmer)
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- SELV
- Output current 180, 350 or 500 mA
- Output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LC 15W 300/350mA fixC SC SNC2 15W 87500718 TRIDONIC
AED0.00
essence series
Product description
- Fixed output LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Independent LED driver with cable clamps
- Constant current LED driver
- For luminaires of protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current 300 or 350 mA
- Max. output power 15 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
4 Channels DALI DT8 Dimmer with Built-in Master Function SR-2309FA-OLED
AED0.00
* Pricing Available upon Request *
Product Description
Product Description
SR-2309FA-OLED is the world first DALI certified DT8 dimmer with built-in DALI master function and OLED display for visible manual configuration. The LED dimmer is designed with 4 PWM outputs which are controlled via a single DALI address. DT8 color types all in one: Tc, RGBWA, XY+ Tc, RGB+ Tc can be set. It enables to address (00-63) and group (0-15) the dimmer. It enables to predefine and recall total 16 DALI scenes to the dimmer. PWM output frequency can be set from 250Hz-30KHz which ensures ultra smooth color control.
It enables to set a Min. level for dimming between this level to Max. level. Output level and DT8 color can be set manually. DALI default parameters such as fade time, fade rate, power on level, system failure level can be set .
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS
