BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
SR-2422T8-DA2
AED0.00
Product Description
The DALI Switch can be used as input device for the integration in DALI-2 compliant central lighting control systems. In this mode each input (âinstanceâ) informs about changes by using so called âinput notificationsâ. These event-messages can be evaluated by other controllers on the DALI-line e.g. as trigger for commands sent to luminaires. The DALI-Switch provides 6 instances of type 1 (input device â push button). Instance 1-6: Push Button, Instance Type 1 (according IEC62386-301, Input Devices â Push Button) According to the standard the following INPUT NOTIFICATIONs are supportedDALI Dimmable Driver(1 channel) SR-2303S
AED0.00
* Pricing Available upon Request *
Product Description
The DALI Dimmer SR-2303S is a mini size constant voltage LED dimming controller with 1 channel 8A per channel output, which complies with standard DALI protocol with 1 DALI address to control 1 channel separately. The DALI address will be automatically assigned by master controllers. 1 DALI address is available for 1 channels work separately. 0%-100% smooth dimming can be achieved by the DALI dimmer via logarithmic dimming, which is perfect for human's vision.
DALI WT LED Controller for magnet Track Light SRP-2309-MT-48CCT
* Pricing Available upon Request *
Product Description
With super-slim design, this DALI DT8 tunable white LED controller for magnet track light is specially devised for magnet track light and linear lighting. Magnet absorption installation application ensures no high frequency interference sound. This controller has DC48V input, with max. output power 30W total. Equipped with 2 channels 100-700mA constant current output, dips are used to select multi operation current. This device has deep and smooth dimming to 0.1%, without flicker. It is in compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, IEC 62386-209:2011. With built-in DALI-2 interface, this DALI DT8 device controls Warm White and Cool White output via a single DALI address. Besides, it enables Dimming and Color Temperature Adjustment, and supports DT8 device commands, compatible with DALI masters that support DT8 commands. This controller can be configurated via DALI master USB interface. Its waterproof grade is IP20, with 5-year warranty.
Driver LC 75W 250–550mA 1-10V lp EXC 75W 28001982 TRIDONIC
AED0.00
excite 1â10V non-SELV series
Product description
- Constant current LED driver for luminaire installation
- Dimmable via 1 ... 10 V interface
- Dimming range 10 â 100 % (Depending on load, for details refer to chapter 4.7 Dimming in data sheet.)
- For luminaires of protection class I and protection class II
- Adjustable output current between 250 and 550 mA via ready2mains Programmer or I-SELECT 2 plugs
- Max. output power 75 W
- Up to 94 % efficiency
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LC 50W 350mA fixC lp SNC2 50W 87500843 TRIDONIC
AED0.00
essence series non-SELV
Product description- Fixed output built-in LED driver
- Constant current LED driver
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current 250, 300 or 350 mA
- Max. output power 50 W
- Up to 91 % efficiency
- Nominal lifetime up to 50,000 h
- 5 years guarantee
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS