OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Driver LC 50W 700mA fixC lp SNC 50W 87500447 TRIDONIC
essence series non-SELV Product description
- Fixed output built-in LED driver
- Constant current LED driver
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current 250, 300, 350, 700 or 1,050 mA
- Max. output power 50 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
SR-2830AS-1-10V
* Pricing Available upon Request *
Product Description
0-10V dimmer SR-2830A-1-10V is a full touch LED controller which outputs 1-10V signal and offers both switch on/off and smooth brightness dimming functions. Adopting high strength ultra sensitive touch glass panel, and designed with touch slider, the 0-10V dimmer switch features accurate smooth dimming and switching functions without any flickering. 0.1% to 100% smooth dimming range without any flickering can be very comfortable for human eyes. Humanized back lighting function enables the touch panel to be found even in the dark. The touch dimmer is powered by a 24VDC power supply and can be compatible with existing standard size 86*86mm wall boxes.
SR-SB9101SAC-HP-SWITCH
* Pricing Available upon Request *
Product Description
With input and output voltage range of 100-240VAC and one channel output, this RF+Bluetooth AC In-wall Switch supports resistive loads and capacitive loads. By virtue of screw terminals, this device is safe and reliable. It enables to control ON/OFF of connected load, and can be controlled through both smart App and remote controls, without any gateway. It can easily and quickly pair to the smart App by simply pushing the reset button. Besides, for this smart switch, Cloud control is available for remote access.
Driver LC 17W 250–700mA bDW SC PRE2 | 28002412
Product description
- NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance)
- Dimmable built-in constant current LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Forms automatically a wireless communication network with up to 250 nodes
- Adjustable output current between 250 and 700 mA via ready2mains Programmer or I-SELECT 2 plugs
- Max. output power 17 W
- Up to 86 % efficiency
- Power input on stand-by < 0.35 W
- Dimming range 1 to 100 %
- For luminaires of protection class I and protection class II
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Housing properties
- Casing: polycarbonate, white
- Type of protection IP20
Interfaces
- basicDIM Wireless
- ready2mains (configuration via mains)
- Terminal blocks: 45° push terminals
Functions
- Adjustable output current in 1-mA-steps (ready2mains, I-SELECT 2)
- Constant light output function (CLO)
- Power-up fading at AC
- Switch off the driver with fade2zero
- Configurable via ready2mains
- Service monitor to log certain events
- Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification)
- Intelligent Voltage Guard (overvoltage and undervoltage monitoring)
- Suitable for emergency escape lighting systems acc. to EN 50172
Benefits
- Application-oriented operating window for maximum compatibility
- Best energy savings due to low stand-by losses and high efficiency
- Flexible configuration via basicDIM Wireless, ready2mains and I-SELECT 2
Typical applications
- For linear/area lighting in office applications
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS