BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
SR-3003S
AED0.00
Product Description
The SR-30-035 is a 12-36VOC constant voltage LEO power repeater with 1channe maximum SA per channel output, which is designed to expand power output and receive PWM signal Control. By adding one more power repeater, the controller can control one to three times more LEDs, and unlimited power repeaters can be connected together to expand power output unlimited y theoretically.Driver LC 75W 250–550mA 1-10V lp EXC 75W 28001982 TRIDONIC
AED0.00
excite 1â10V non-SELV series
Product description
- Constant current LED driver for luminaire installation
- Dimmable via 1 ... 10 V interface
- Dimming range 10 â 100 % (Depending on load, for details refer to chapter 4.7 Dimming in data sheet.)
- For luminaires of protection class I and protection class II
- Adjustable output current between 250 and 550 mA via ready2mains Programmer or I-SELECT 2 plugs
- Max. output power 75 W
- Up to 94 % efficiency
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LC 53W 1130–1200mA 0-10V fixC lp SNC UNV 53W 87500861 TRIDONIC
AED0.00
Linear essence series (US applications)
Product description
- Constant current LED driver
- Only for US applications
- Dimmable via 0 ... 10 V
- Dimming range 10 to 100 %
- Class 2
- FCC Part 15
- Meets UL 8750 SF3.1
- Meets DesignLights Consortium 4.3
- Temperature protection as per UL8750/UL Recognized
- Adjustable output current 1,130 or 1,200 mA
- Max. output power 53 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LC 40W 900mA fixC SC SNC2 40W 87500744 TRIDONIC
AED0.00
essence series Product description
- Fixed output LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Independent LED driver with cable clamps
- Constant current LED driver
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current 900 or 1,050 mA
- Max. output power 40 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LC 15W 350mA fixC pc SR SNC2 15W 28003345 TRIDONIC
AED0.00
essence series
Product description
- Dimmable constant current LED driver (SELV)
- Independent driver with strain-relief housing
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- Dimmable via leading edge and trailing edge phase dimmers
- Dimming range 5 to 100 % (depending on dimmer)
- For luminaires with F or M and MM as per EN 60598, VDE 0710 and VDE 0711
- Max. output power 14.7 W
- Output current 350 mA
- Nominal lifetime up to 50,000 h
- 5 years guarantee
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS