BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Driver LC 19W 350mA fixC lp SNC2 19W 87500779 TRIDONIC
AED0.00
essence series SELV
Product description- Fixed output built-in LED driver
- Constant current LED driver
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current 350 mA
- Max. output power 18.9 W
- Up to 88 % efficiency
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LC 10W 500mA fixC SR SNC2 10W 87500803 TRIDONIC
AED0.00
essence series
Product description
- Independent driver with strain-relief housing
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- Temperature protection as per EN 61347-2-13 C5e
- Output current 250, 350, 500 or 700 mA
- Max. output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
SR-1009FA
AED0.00
Product Description
The LED controller 5R-1009FA is a universal constant voltage LED strip dimmer controller with 12-36VDC input and output for mono chrome, dual color and RGB/RGBW lights. It is designed with4 channels and maximum SA/channel output. Bui t-in RF receiver enables the LED light controller to be wireless controlled by remote and wall mounted controllers and be compatible with a variety of remotes to control single color, dual color and RGB/RGB+W LED lights especial y LED strip lights. For single co or LED strip, the 5R-1009FA works as LED dimmer to adjust brightness and switch on/off. For CW+WW dual color LED lights, the RF controller features both dimmer and color temperature controller functions. For RGB/RGB+W LED, the LED controller offers brightness dimmer function for each channel, RGB color tone adjustment function and dynamic changing patterns. Multiple zones can be controlled separately or synchronously with endless receivers in each zone. Built- in changing patterns are available and can be saved to each one. Brightness of each R,G,B,W channel can be dimmable separately to achieve millions of changing colors .While working with WIFI-RF converters, the LED strip light controller can be WiFi controlled by APP installed on 105 or Android mobile devices. Waterproof version is available with IP67  rating.Driver LCA 75W 250–550mA one4all lp PRE 75W 28001250 TRIDONIC
AED0.00
premium series non-SELV
Product description
- NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
- Dimmable built-in constant current LED driver
- Dimming range 1 to 100 %
- For luminaires of protection class I and protection class II
- Output current adjustable between 250 â 550 mA
- Max. output power 75 W
- Up to 92 % efficiency
- Power input on stand-by < 0.15 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
EM converterLED BASIC 203 NiCd/NiMH 50V | 89800559
AED0.00
Properties
_ Non maintained operation _ 1 or 3 h rated duration _ Operating time selectable with plug (duration link) _ Compatible with all dimmable and non-dimmable constant current LED driver (see data sheet, LED driver compatibility) _ 3-pole technology: 2-pole LED module changeover and delayed power switching for the LED driver _ Automatic shutdown of output if LED load is out of range _ Constant power output _ Maximum light output for all LED modules _ Electronic charge system _ Deep discharge protection _ Short-circuit-proof battery connection _ Polarity reversal protection for batteryBatteries
_ High-temperature cells _ NiCd or NiMH batteries _ D, Cs or LA cells _ 4 year design life _ 1 year guarantee _ For battery compatibility refer to data sheetLEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS