OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
  
SR-SB9040A-S
Key Features
- RF+Bluetooth micro smart dimmer
- Can operate under two-... ire connection with no neutral lead or three-wire connection with neutral lead
- Both leading edge version and trailing edge version are available for choosing. factory default is trailing edge
- Enables to control ONIOFF and light intensity of connected load
- Controlled through both smart App and remote controls, no gateway required
- Easy & quick pairing to the smart App by simply pushing the reset button, supports voice control through Alexa
- Mesh network, much longer control distance: transmits received signal to neighbor devices
- Up to 30m transmission distance between every two neighbor devices
- Encrypted two-way communication, quick status feedback. safe & reliable data transmission
- Compatible with universal REA-Bluetooth remotes: each LED controller can pair to max. 6 remotes
- Cloud control is available for remote access. works with Amazon Alexa and Google Home
- Implemented algorithm of smart light source detection
- Auto-adjustment of the appropriate control mode to connected load
- Soft start function
- Memory of the last lighting level settings
- Works with various types of switches — momentary. toggle. three-way. etc.
- To be installed in wall switch boxes of dimensions allowing for installation
- The Bypass is an extension unit.
Driver LCBI 10W 180mA PHASE-CUT/1–10V SR 10W 87500273 TRIDONIC
advanced series
Product description
- Independent dimmable LED driver
- Constant current LED driver
- Dimmable via leading edge and trailing edge phase dimmers
- Dimmable via 1 ... 10 V
- Output dimmed analogue (current amplitude)
- Dimming range typ. 10 to 100 % (depending on dimmer)
- For luminaires of protection class I and protection class II
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Temperature protection as per EN 61347-2-13 C5e
- SELV
- Output current 180, 350 or 500 mA
- Output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
COB-Cree 1516
* Pricing Available upon Request *
Product Description
The XLamp® High-Current LED Array family
is optimized for best-in-class lumen output,
efficacy and reliability at high drive currents.
XLamp CMA LEDs share the same package
design and LES sizes as Cree LED’s
industry-leading CXA2 Standard Density
LEDs, enabling lighting manufacturers
to address a range of performance
requirements for applications such as
track, downlight and outdoor lighting using
a single easy‑to‑use platform. XLamp
High‑Current LED Arrays are available in
2-step, 3-step and 5-step EasyWhite® bins.
ZG9101SAC-HP
Product Description
The SR-ZG9101SAC-HP is an innovative AC phase-cut dimmer with ZigBee control interface. The AC dimmer is designed with 100-240VAC wide input and output,1channeland maximum 400W output.The ZigBee AC dimmer is available with both leading edge dimming version and trailing edge dimming version for choosing. The innovative minimum brightness setting function enables users to set a minimum brightness and dim from this minimum brightness to 100% brightness. Also it is easy to delete the minimum brightness. The AC dimmer can be compatible with universal ZigBee coordinator or gateway controller to be paired to the network. It is controllable from your ZigBee gateway interface or remote controllers that are added to the network and bind with the dimmer. The zigbee device is based on zigbee 3.0,it can be linked to and controled by max. 30 zigbee remotes that support zigbee tight link through touchlink. lt also supports the new zigbee green power feature, and can bind to and be controled by max. 20 zigbee green power remotes direct y without zigbee hub or gateway.LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS